Airtac SE80 Standard Cylinder SE80X192SN
The AirTAC Airtac SE80 Standard Cylinder SE80X192SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 192mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke192 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X192SN
The AirTAC SE80X192SN is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver a robust 2513 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing sensor grooves on three sides for flexible positioning.
This 80 mm bore unit integrates a built-in magnet for CMSE and DMSE position detection, paired with an NBR seal suitable for standard operating temperatures. The field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed 30-800 mm/s cycling.
Airtac SE80 Standard Cylinder SE80X192SN Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X192SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 192 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X192SN
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×192 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X192SN Is Used
Injection Mold Extraction
Utilizes the 2513 N push force to reliably eject heavy plastic automotive interior panels from injection molding dies.
Pallet Diverting
Leverages the 192 mm stroke and NBR seal to drive heavy-duty diverter arms on high-throughput packaging conveyors.
CNC Lathe Unloading
Employs the built-in magnet with DMSE sensors to time the extraction of finished steel shafts from CNC turning centers.
Is the Airtac SE80 Standard Cylinder SE80X192SN the Right Cylinder?
If your application demands less force, the 63 mm bore variant provides 1559 N of push at 0.5 MPa, whereas stepping up to the 100 mm bore yields 3927 N. The 192 mm stroke on this model is a custom dimension that falls between standard strokes, ensuring exact travel for specialized mechanisms. Because this is a double-acting cylinder, the adjustable air cushion only decelerates the piston near the end of its travel; it does not lock or hold the load if air pressure is lost. For position holding, consider a BSE rod lock variant. Since the 192 mm stroke exceeds 300 mm? No, it is under 300 mm, so standard bearing loads apply, though long unsupported strokes always benefit from an external guide. Its standardized ISO 15552 mounting interface guarantees drop-in compatibility with existing foot, flange, and trunnion hardware.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X192SN FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force reaches 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE80X192SN is dimensionally interchangeable per ISO 15552 standards. You can use it as a drop-in replacement for other ISO 15552 profile cylinders, retaining your existing PT3/8 port connections and mounting brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X192SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.