Airtac SE80 Standard Cylinder SE80X195
The AirTAC Airtac SE80 Standard Cylinder SE80X195 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 195mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke195 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X195
The AirTAC SE80X195 is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It delivers a robust 2513 N push force at 0.5 MPa, utilizing an 80 mm bore and a 195 mm stroke. Built with a square extruded aluminum barrel, it omits external tie rods to provide a flush, corrosion-resistant exterior that simplifies machinery mounting and reduces contamination traps.
This model features a Ø25 mm hard-chrome plated rod with an M20x1.5 thread, paired with a PT3/8 port for optimal airflow. Field-adjustable pneumatic cushioning at both ends allows technicians to fine-tune end-of-stroke deceleration, effectively preventing hard mechanical impacts during high-speed cycling. Note that this specific SKU is supplied without a position-sensing magnet.
Airtac SE80 Standard Cylinder SE80X195 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X195 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X195
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X195 Is Used
Palletizer Case Pusher
Drives a 195 mm stroke to square and push heavy corrugated cardboard cases onto palletizing conveyors, utilizing the 2513 N push force to overcome box friction.
Press Brake Backgauge
Positions sheet metal stops in a hydraulic press brake, where the 3518 N push force at 0.7 MPa holds the gauge firmly against vibration during forming operations.
Injection Mold Ejector
Acts as a secondary knockout arm for an injection molding machine, using its 2268 N pull force to retract a heavy mold core safely within the 195 mm travel.
Is the Airtac SE80 Standard Cylinder SE80X195 the Right Cylinder?
When sizing this 80 mm bore actuator, consider stepping down to the 63 mm bore (1559 N push at 0.5 MPa) for lighter loads, or stepping up to the 100 mm bore (3927 N push at 0.5 MPa) for heavier mass. As a standard ISO 15552 profile cylinder, it serves as a drop-in dimensional replacement for other ISO 15552 cylinders, sharing standard mounting hardware. Remember that the adjustable air cushion only decelerates the piston near stroke end; it is not a locking mechanism, so loads will drift if air pressure is lost. For any stroke length of 300 mm or more, an external guide is recommended to prevent rod-bearing bending under side loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X195 FAQ
The SE80X195 generates 2513 N of push force at 0.5 MPa, 2268 N of pull force at 0.5 MPa, 3518 N of push force at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet option required for CMSE or DMSE position sensors. If your application requires electronic or reed position feedback, you must select an SE80 model configured with the -S magnet suffix.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X195
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.