Airtac SE80 Standard Cylinder SE80X195S
The AirTAC Airtac SE80 Standard Cylinder SE80X195S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 195mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke195 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X195S
The AirTAC SE80X195S is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 2513 N of push force at 0.5 MPa. Featuring a 195 mm stroke and an 80 mm bore, it operates on filtered air at pressures from 0.15 to 1.0 MPa. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while simplifying sensor placement along its three integrated grooves.
This unit includes a built-in magnet (-S) designed to interface seamlessly with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. Field-adjustable pneumatic cushioning at both ends allows technicians to tune the deceleration of the 25 mm hard-chrome rod, softening hard end stops during high-speed 30-800 mm/s cycles. It is a genuine AirTAC component built for rigorous industrial environments.
Airtac SE80 Standard Cylinder SE80X195S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X195S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X195S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X195S Is Used
Carton Folding Arms
Provides 2513 N of push force to drive heavy cardboard folding mechanisms during high-speed packaging line cycles.
Pallet Diverters
Uses the 195 mm stroke to push loaded pallets cleanly onto secondary conveyor lanes without tie-rod interference.
Injection Mold Ejection
Leverages the built-in magnet and DMSE sensors to confirm ejection stroke completion on 80 mm injection molding machines.
Is the Airtac SE80 Standard Cylinder SE80X195S the Right Cylinder?
When sizing this 80 mm bore actuator, evaluate your exact thrust requirements: stepping down to the 63 mm bore drops the 0.5 MPa push force to 1559 N, while moving up to the 100 mm bore increases it to 3927 N. Because the stroke is 195 mm, the 25 mm rod and M20x1.5 thread provide substantial side-load capacity, though an external guide is still recommended for heavy lateral loads. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct drop-in replacement for other standard profile cylinders, utilizing the same PT3/8 port and standard mounting accessories. Note that a plain SE cylinder relies on live air pressure to hold its position; if your process requires static load holding upon air loss, consider the BSE rod lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X195S FAQ
This 80 mm bore cylinder generates 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and a maximum of 513 kgf at 1.0 MPa. Its operational speed ranges from 30 to 800 mm/s.
No. The field-adjustable air cushions at both ends only decelerate the piston near the stroke ends; they do not lock or hold the load. If static position holding is required upon air loss, you must use a BSE rod lock variant or an external pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X195S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.