Airtac SE80 Standard Cylinder SE80X200SN
The AirTAC Airtac SE80 Standard Cylinder SE80X200SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke200 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X200SN
The AirTAC SE80X200SN is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding pneumatic tasks. It features an 80 mm bore and a 200 mm stroke, generating 2513 N of push force at 0.5 MPa and up to 3518 N at 0.7 MPa. The extruded aluminum barrel omits external tie rods, presenting a clean, corrosion-resistant profile that mounts flush against machine frames while resisting mechanical snags.
This unit includes a built-in magnet for CMSE reed and DMSE electronic position sensing, alongside an NBR seal suited for standard temperature operations. Field-adjustable air cushions at both ends allow technicians to dial in end-of-stroke deceleration, softening hard impacts during high-speed 30-800 mm/s cycling.
Airtac SE80 Standard Cylinder SE80X200SN Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X200SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X200SN
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X200SN Is Used
Pallet Transfer Diverter
Harnessing 2513 N of push force at 0.5 MPa, this actuator reliably diverts heavy wooden pallets between adjacent roller conveyor lines without stalling.
Corrugated Box Flap Folder
The 200 mm stroke and integrated DMSE sensor magnet provide precise timing for folding large corrugated carton flaps at line speeds up to 800 mm/s.
Injection Mold Ejection
Adjustable pneumatic cushions soften the retract stroke when pulling heavy injection-molded automotive interior panels from tooling, protecting part surfaces.
Is the Airtac SE80 Standard Cylinder SE80X200SN the Right Cylinder?
When sizing this 80 mm bore actuator, evaluate your exact force requirements: stepping down to a 63 mm bore yields 1559 N push at 0.5 MPa, whereas moving up to a 100 mm bore provides 3927 N push. This SE80X200SN uses a PT3/8 port and an M20x1.5 rod thread, matching the standard ISO 15552 mounting interface for direct drop-in replacement. Because the stroke is 200 mm, ensure the unsupported rod length does not induce excessive bending; utilize an external guide to prevent side-load damage to the rod bearing.
Remember that a standard double-acting cylinder drifts when air is removed or a valve is centered, so this model cannot hold a load unpowered. If your fixture requires true mid-stroke locking, pivot to the AirTAC BSE rod-lock variant instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X200SN FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force reaches 3518 N. The absolute maximum push force is 513 kgf at 1.0 MPa.
Yes, the SE80X200SN is dimensionally interchangeable per ISO 15552 standards. You can swap it directly into existing mounting hardware using its PT3/8 port and M20x1.5 rod thread without modifying the machine frame.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X200SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.