Airtac SE80 Standard Cylinder SE80X225
The AirTAC Airtac SE80 Standard Cylinder SE80X225 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 225mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke225 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X225
The AirTAC SE80X225 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a robust 2513 N push force at 0.5 MPa. With a 225 mm stroke and an 80 mm bore, it leverages a square extruded aluminum barrel that eliminates external tie rods. This clean profile design not only resists corrosion but also allows for flush mounting on machinery where space is at a premium.
Because this specific SKU lacks the -S magnet suffix, it is not equipped for AirTAC CMSE or DMSE position sensing out of the box. Instead, it focuses on pure mechanical reliability, utilizing field-adjustable air cushioning at both ends. You can tune the end-of-stroke deceleration via a screw to soften hard impacts when cycling at speeds up to 800 mm/s, ensuring smooth operation without relying on fixed rubber bumpers.
Airtac SE80 Standard Cylinder SE80X225 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X225 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X225
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X225 Is Used
Pallet Conveyor Diversion
Provides 2513 N of push at 0.5 MPa to reliably divert heavy pallets onto secondary packaging lines without tie-rod interference.
Corrugated Box Forming
Delivers 3518 N of thrust at 0.7 MPa to fold and secure heavy corrugated cardboard flaps during high-speed automated case erecting.
Injection Mold Ejection
Uses the 225 mm stroke to positively eject large molded plastic parts from heavy machinery, tuning the adjustable cushion to protect the mold face.
Is the Airtac SE80 Standard Cylinder SE80X225 the Right Cylinder?
If your application requires slightly less force, stepping down to the 63 mm bore yields a 1559 N push at 0.5 MPa, while moving up to the 100 mm bore provides a 3927 N push. This SE80X225 is dimensionally interchangeable per ISO 15552, meaning it serves as a drop-in replacement for other ISO 15552 profile cylinders and shares standard mounting hardware. It features a PT3/8 port and a 25 mm rod with an M20x1.5 thread. Note that a plain SE cylinder does not hold its position when air is exhausted or a valve is centered; if your process requires failsafe load holding, consider the BSE rod lock variant. Additionally, at 225 mm of stroke, the 25 mm rod handles moderate side loads well, but for heavy offset loads, an external guide is recommended to prevent rod-bearing bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X225 FAQ
The SE80X225 generates 2513 N of push force and 2268 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 3518 N. The maximum push force is 513 kgf at the maximum operating pressure of 1.0 MPa.
Yes, the SE80X225 is dimensionally interchangeable per ISO 15552 mounting interface standards, allowing it to function as a drop-in replacement for other ISO 15552 profile cylinders. It uses a standard PT3/8 port and shares standardized mounting accessories.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X225
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.