Airtac SE80 Standard Cylinder SE80X230S
The AirTAC Airtac SE80 Standard Cylinder SE80X230S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 230mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke230 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X230S
The AirTAC SE80X230S is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty automation. Operating at 0.5 MPa, it generates 2513 N of push force and 2268 N of pull force, scaling to a maximum push of 513 kgf at 1.0 MPa. The 230 mm stroke is a made-to-order length exceeding the 150 mm standard maximum for this 80 mm bore, tailored for specialized machinery.
Built with a square extruded aluminum barrel free of external tie rods, the body is compact and inherently corrosion-resistant for flush mounting. The integrated -S magnet enables precise end-of-stroke detection using AirTAC CMSE reed or DMSE electronic sensors. Furthermore, the field-adjustable air cushioning at both ends allows technicians to dial in the exact deceleration needed to soften hard end stops at high cycling speeds.
Airtac SE80 Standard Cylinder SE80X230S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X230S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X230S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X230S Is Used
Injection Mold Extraction
Provides the 2513 N push force required to reliably extract heavy plastic injection molds from tooling over a 230 mm travel distance.
Pallet Diverter Arm
Leverages the 230 mm stroke and 3518 N push at 0.7 MPa to push heavy pallets onto secondary conveyor lanes in high-throughput logistics hubs.
Heavy Door Automation
Drives large automated warehouse access doors, utilizing the 80 mm bore's robust pull force and adjustable cushioning to prevent slamming at stroke end.
Is the Airtac SE80 Standard Cylinder SE80X230S the Right Cylinder?
When sizing this 80 mm bore actuator, evaluate your force margins against neighboring options. Stepping down to the 63 mm bore yields 1559 N of push at 0.5 MPa, while stepping up to the 100 mm bore provides 3927 N. The SE80X230S is dimensionally interchangeable per ISO 15552, serving as a drop-in replacement for other ISO 15552 cylinders without altering mounting hardware. Because the 230 mm stroke exceeds standard lengths, it is non-standard and made-to-order. As with any stroke of 300 mm or more, long unsupported travel increases rod-bearing bending risks; an external guide is highly recommended to prevent side-load damage. Note that the adjustable air cushion only decelerates the piston near stroke end and does not hold a load if air pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X230S FAQ
The SE80X230S features an 80 mm bore, a PT3/8 port, and a Ø25 mm rod with an M20x1.5 thread. It delivers 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa.
No, the SE80X230S is a standard double-acting cylinder. The adjustable air cushion only decelerates the piston near the end of its stroke; it does not lock or hold a load. If your application requires position holding without live air pressure, you should use a BSE rod lock cylinder or an external pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X230S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.