Airtac SE80 Standard Cylinder SE80X262SN
The AirTAC Airtac SE80 Standard Cylinder SE80X262SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 262mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke262 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X262SN
The AirTAC SE80X262SN is a double-acting single-rod ISO 15552 profile cylinder featuring an 80 mm bore and a 262 mm stroke. Because 262 mm is a non-standard length, it is produced as a made-to-order unit. It delivers a robust 2513 N push force at 0.5 MPa and 3518 N at 0.7 MPa, making it well-suited for heavy-duty positioning tasks.
This actuator uses an extruded aluminum barrel without external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. It includes a built-in magnet for CMSE and DMSE position sensing, and uses an NBR seal. The field-adjustable air cushioning at both ends allows you to tune end-of-stroke deceleration via a set screw, softening hard impacts at high cycling speeds.
Airtac SE80 Standard Cylinder SE80X262SN Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X262SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 262 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X262SN
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×262 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X262SN Is Used
Pallet Transfer Stops
Halts heavy wooden pallets on a packaging line using the 2513 N push force, while the NBR seal withstands dusty ambient shop environments.
CNC Fixture Clamping
Secures heavy cast iron blocks during machining, utilizing the 3518 N push at 0.7 MPa and the adjustable cushion to soften rapid clamping impacts.
Carton Case Erector
Folds corrugated cardboard blanks at high cycle rates, relying on the integrated magnet for CMSE sensor feedback to verify full extension.
Is the Airtac SE80 Standard Cylinder SE80X262SN the Right Cylinder?
When sizing this 80 mm bore actuator, compare its 2513 N push at 0.5 MPa against its neighbours: the 63 mm bore provides 1559 N, while the 100 mm bore offers 3927 N. This model is dimensionally interchangeable per ISO 15552, serving as a direct drop-in replacement for other ISO 15552 profile cylinders using identical mounting hardware. The 262 mm stroke is non-standard and made-to-order; confirm lead times for your RFQ. Since the stroke exceeds 300 mm, long unsupported strokes risk rod-bearing bending—use an external guide to prevent excessive side loading. Note that a plain SE does not hold its load when air is lost; if your application requires position holding without live pressure, consider the BSE rod lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X262SN FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N push and 2268 N pull. At 0.7 MPa, the push force is 3518 N. The maximum push force is 513 kgf at the rated 1.0 MPa operating pressure.
No, the adjustable air cushion only decelerates the piston near the stroke end; it is not a brake. If the air supply is lost or the valve is centered, the piston will drift. For fail-safe load holding, use a BSE rod lock cylinder or an external pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X262SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.