Airtac SE80 Standard Cylinder SE80X280SH
The AirTAC Airtac SE80 Standard Cylinder SE80X280SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 280mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke280 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X280SH
The AirTAC SE80X280SH is a double-acting, single-rod ISO 15552 profile cylinder engineered for rigorous industrial environments. It features an 80 mm bore and a 280 mm stroke, generating a substantial 2513 N push force at 0.5 MPa and 3518 N at 0.7 MPa. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal mechanics.
Fitted with a high-temperature Viton (FKM) seal, this unit reliably operates from -20 to +150 C, making it ideal for hot processing lines. The built-in magnet (-S) directly supports AirTAC CMSE reed and DMSE electronic position sensors. Furthermore, the field-adjustable pneumatic cushioning at both ends allows technicians to dial in end-of-stroke deceleration via a set screw, softening hard impacts during high-speed cycling.
Airtac SE80 Standard Cylinder SE80X280SH Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X280SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X280SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X280SH Is Used
Injection Mold Platen Ejection
Provides the 2518 N push force required to eject dense plastic parts from hot injection molds, leveraging the FKM seal to withstand ambient radiant heat up to 150 C.
Hot-Melt Palletizer Flap Folding
Actuates heavy cardboard flap folders on high-speed palletizing lines, using its 280 mm stroke and adjustable end cushions to prevent tearing during rapid retraction.
Foundry Core Box Clamping
Secures heavy sand core boxes against intense vibration and thermal exposure, relying on the robust 80 mm bore thrust and high-temperature Viton elastomers.
Is the Airtac SE80 Standard Cylinder SE80X280SH the Right Cylinder?
Selecting the SE80X280SH is optimal when your application requires heavy mid-range thrust. If you need less force, stepping down to the 63 mm bore drops the 0.5 MPa push to 1559 N, whereas stepping up to the 100 mm bore increases it to 3927 N. Because this is a 280 mm stroke, the unsupported piston rod (Ø25 mm, M20x1.5 thread) is subject to bending under lateral loads; always pair it with an external guide rail to prevent premature rod-bearing wear. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct drop-in replacement for other ISO 15552 profile cylinders, utilizing standard PT3/8 ports and shared mounting accessories. Note that the adjustable air cushion only decelerates the piston near stroke end—it does not hold the load. If air pressure is lost, the rod will drift; for positive holding, consider the BSE rod lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X280SH FAQ
At 0.5 MPa, this 80 mm bore cylinder outputs 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force reaches 3518 N. The maximum push force is 513 kgf at 1.0 MPa. It operates at speeds between 30 and 800 mm/s.
Yes. The SE80X280SH is dimensionally interchangeable per ISO 15552 standards. You can use it as a drop-in replacement for other ISO 15552 profile cylinders, matching the standard PT3/8 port size and 80 mm mounting dimensions without altering your machine footprint.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X280SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.