Airtac SE80 Standard Cylinder SE80X290S
The AirTAC Airtac SE80 Standard Cylinder SE80X290S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 290mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke290 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X290S
The AirTAC SE80X290S is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 2513 N of push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing standardized mounting interfaces for seamless retrofitting.
Equipped with a built-in magnet (-S), this unit readily integrates with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. Field-adjustable pneumatic cushioning at both ends allows mechanics to tune end-stop deceleration, softening impacts during high-speed 30-800 mm/s cycling.
Airtac SE80 Standard Cylinder SE80X290S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X290S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X290S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X290S Is Used
Carton Erector Flaps
Drives the folding mechanism on case erectors, using the 290 mm stroke to clear wide packaging materials while providing 2513 N of push force to crease heavy corrugated board.
Press Brake Demolding
Ejects formed metal sheets from press brakes, leveraging the adjustable cushioning to decelerate the 80 mm bore piston smoothly before the end of its stroke.
Pallet Diverters
Actuates sorting gates on heavy-duty roller conveyors, where the integrated magnet triggers DMSE sensors to confirm gate positioning for the PLC.
Is the Airtac SE80 Standard Cylinder SE80X290S the Right Cylinder?
If your assembly requires less thrust, the 63 mm bore variant offers 1559 N of push at 0.5 MPa, whereas stepping up to the 100 mm bore yields 3927 N for heavier payloads. Because the 290 mm stroke creates a long lever arm on the Ø25 mm rod, applying an external guide is strongly recommended to prevent rod-bearing bending under lateral loads. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a drop-in replacement sharing identical PT3/8 ports and mounting footprints.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X290S FAQ
The SE80X290S generates 2513 N of push force and 2268 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. It features a PT3/8 port.
No, the adjustable air cushion at both ends only decelerates the piston near the stroke limits and is not a locking mechanism. If the application must hold a load without live pressure, consider the AirTAC BSE rod lock series or an external pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X290S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.