Airtac SE80 Standard Cylinder SE80X292S
The AirTAC Airtac SE80 Standard Cylinder SE80X292S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 292mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke292 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X292S
The AirTAC SE80X292S is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver a robust 2513 N push force at 0.5 MPa. Its square extruded aluminum barrel entirely eliminates external tie rods, yielding a highly corrosion-resistant and compact body that mounts flush against machine frames. This clean profile prevents dirt traps, making it exceptionally suited for demanding industrial environments.
Equipped with a built-in magnet, this unit seamlessly interfaces with AirTAC CMSE reed and DMSE electronic sensors to provide precise end-of-stroke position feedback. The field-adjustable pneumatic cushioning at both ends allows technicians to dial in end-stop deceleration via a set screw, smoothly absorbing kinetic energy at the end of its 292 mm travel rather than slamming into a fixed bumper.
Airtac SE80 Standard Cylinder SE80X292S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X292S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 292 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X292S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×292 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X292S Is Used
Corrugated Box Palletizers
Provides the 2513 N push force required to securely compress and stack heavy corrugated cardboard cartons on outbound pallets without crushing the packaging structure.
Metal Stamping Press Ejection
Leverages the 292 mm stroke and adjustable end-cushions to safely push stamped sheet metal blanks out of a die, decelerating smoothly to prevent workpiece marking.
Automotive Component Fixturing
Uses the built-in magnet for DMSE sensor confirmation while clamping heavy drivetrain housings onto machining centers, ensuring the part is locked before cutting begins.
Is the Airtac SE80 Standard Cylinder SE80X292S the Right Cylinder?
Generating 2513 N of thrust at 0.5 MPa, this 80 mm bore is a heavy-duty workhorse. If your application requires slightly less force, the 63 mm bore offers 1559 N of push, whereas stepping up to the 100 mm bore yields 3927 N for heavier payloads. Because the 292 mm stroke creates an extended lever arm, long unsupported travel introduces side-load bending stress on the rod bearing; always utilize an external guide to prevent premature wear. Remember that a standard SE cylinder relies on live air pressure to maintain its position—if air is lost or the valve centers, the piston will drift; for true fail-safe holding, explore the BSE rod-lock variant. Furthermore, its standardized ISO 15552 mounting interface ensures drop-in compatibility with existing mounting hardware when retrofitting.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X292S FAQ
At 0.5 MPa, the SE80X292S delivers 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N. The absolute maximum thrust is 513 kgf when operated at the maximum rated pressure of 1.0 MPa.
Yes, the SE80X292S is dimensionally interchangeable per ISO 15552 standards. You can use it as a drop-in replacement for other ISO 15552 profile cylinders, reusing your existing mounting hardware and PT3/8 pneumatic port connections without modifying the machine frame.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X292S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.