Airtac SE80 Standard Cylinder SE80X300SN
The AirTAC Airtac SE80 Standard Cylinder SE80X300SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 300mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke300 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X300SN
The AirTAC SE80X300 is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty automation. It delivers a robust 2513 N push force at 0.5 MPa and 3518 N at 0.7 MPa, utilizing an 80 mm bore and 25 mm hard-chrome piston rod. The square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant profile that mounts flush in tight machine spaces.
This 300 mm stroke model includes a built-in magnet for CMSE and DMSE position sensing, paired with an NBR seal for standard operating temperatures. Field-adjustable air cushions at both ends allow you to precisely tune end-of-stroke deceleration, protecting heavy payloads from harsh mechanical impacts.
Airtac SE80 Standard Cylinder SE80X300SN Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X300SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X300SN
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X300SN Is Used
Injection Mold Clamping
Provides 2513 N of extend force at 0.5 MPa to secure injection mold halves during resin injection, utilizing the adjustable cushion to halt the 300 mm travel smoothly.
Pallet Diverting
Shifts heavy pallets along a sorting line where the 80 mm bore generates enough push to move substantial weight across the full 300 mm stroke without stalling.
Carton Case Erector
Drives the folding mechanism of industrial packaging equipment, using the built-in magnet and DMSE sensor to verify case positioning before tape application.
Is the Airtac SE80 Standard Cylinder SE80X300SN the Right Cylinder?
Stepping down to the 63 mm bore drops the 0.5 MPa push to 1559 N, while stepping up to the 100 mm bore increases it to 3927 N. Because this is a 300 mm stroke, the 25 mm rod experiences bending moments under side loads; an external guide is recommended to prevent rod-bearing wear. For drop-in ISO 15552 retrofits, match the 80 mm bore, 300 mm stroke, PT3/8 port, and mounting accessory. Note that this cylinder does not hold loads without live air pressure—use a BSE rod lock for fail-safe holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X300SN FAQ
At 0.5 MPa, the SE80X300 provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force is 3518 N. The maximum allowable push force is 513 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable per ISO 15552 standards. However, the adjustable air cushion only decelerates the piston near stroke end; it does not lock or hold the load. If air is lost, the piston will drift, requiring a separate BSE rod lock for fail-safe positioning.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X300SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.