Airtac SE80 Standard Cylinder SE80X313SN
The AirTAC Airtac SE80 Standard Cylinder SE80X313SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 313mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke313 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X313SN
The AirTAC SE80X313SN is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding pneumatic tasks. It features an 80 mm bore and a 313 mm stroke, generating a robust 2513 N of push force at 0.5 MPa and up to 513 kgf at 1.0 MPa. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush in tight machinery spaces while providing standardized ISO 15552 dimensions for direct retrofitting.
This specific configuration includes a built-in magnet (-S) for compatibility with AirTAC CMSE reed and DMSE electronic sensors, alongside NBR seals suitable for standard operating temperatures. The field-adjustable air cushioning at both ends allows technicians to fine-tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed 30-800 mm/s cycling.
Airtac SE80 Standard Cylinder SE80X313SN Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X313SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 313 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X313SN
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×313 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X313SN Is Used
Corrugated Box Flap Folding
Provides 2513 N of push at 0.5 MPa to cleanly fold heavy cardboard flaps on high-speed case erecting lines, utilizing the 313 mm stroke to clear the packaging path during retraction.
Press Brake Tooling Ejection
Exerts up to 513 kgf at 1.0 MPa to strip formed sheet metal from press brake dies, relying on the field-adjustable end cushions to absorb heavy mechanical shocks during rapid 30-800 mm/s operation.
Pallet Diverter Arm
Shifts heavy loaded pallets across conveyor lanes using the 313 mm stroke extension, where the NBR seals withstand typical industrial ambient temperatures and the tie-rod-free profile prevents debris buildup.
Is the Airtac SE80 Standard Cylinder SE80X313SN the Right Cylinder?
When sizing this 80 mm bore actuator, evaluate your force margins: stepping down to the 63 mm bore reduces the 0.5 MPa push to 1559 N, while moving up to the 100 mm bore increases it to 3927 N. Because this model features a 313 mm stroke, the extended 25 mm rod is subjected to greater bending moments under lateral loads; always incorporate an external guide rail to prevent rod-bearing wear. As a standard ISO 15552 profile cylinder, it serves as a drop-in replacement for any ISO 15552 unit matching its 80 mm bore, 313 mm stroke, PT3/8 port, and basic mounting footprint. Remember that the adjustable air cushion only decelerates the piston near stroke end; it does not hold the load if air pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X313SN FAQ
The SE80X313SN delivers a push force of 2513 N and a pull force of 2268 N at 0.5 MPa. At 0.7 MPa, the push force is 3518 N, with a maximum push of 513 kgf at 1.0 MPa. It operates at pressures from 0.15-1.0 MPa and speeds of 30-800 mm/s.
No, the adjustable air cushion at both ends only decelerates the piston near the stroke limits; it is not a locking mechanism. If the application requires position holding without live air pressure, you must use an AirTAC BSE rod lock cylinder or an external pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X313SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.