Airtac SE80 Standard Cylinder SE80X330S
The AirTAC Airtac SE80 Standard Cylinder SE80X330S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 330mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke330 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X330S
The AirTAC SE80X330S is a double-acting single-rod ISO 15552 profile cylinder delivering a robust 2513 N push force at 0.5 MPa. Its extruded aluminum barrel lacks external tie rods, yielding a flush, corrosion-resistant body that simplifies tight-clearance mounting on heavy machinery.
Equipped with a built-in magnet (-S), this unit supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The integrated pneumatic cushioning at both ends is field-adjustable via a screw, allowing you to fine-tune deceleration and soften hard impacts at high cycling speeds.
Airtac SE80 Standard Cylinder SE80X330S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X330S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 330 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X330S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×330 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X330S Is Used
Pallet Transfer Line Diverter
Provides the 2513 N push force needed to reroute heavy loaded pallets at high speed on packaging conveyors.
Injection Mold Ejection
Uses the 330 mm stroke to reach deep into injection molding machines, ejecting large plastic parts smoothly.
CNC Lathe Chute Gate
Actuates heavy safety gates on CNC lathes, relying on DMSE sensors to confirm barrier closure before cycling.
Is the Airtac SE80 Standard Cylinder SE80X330S the Right Cylinder?
When sizing this 80 mm bore, you can step down to the 63 mm bore for 1559 N push at 0.5 MPa, or move up to the 100 mm bore for 3927 N push. As a standard double-acting cylinder, it will drift and drop its load if air pressure is lost or the valve is centered; pair it with a BSE rod lock if the application requires mechanical position holding.
At a 330 mm stroke, the 25 mm rod and internal bearing face increased bending moments from side loads; utilize an external guide rail to prevent premature wear. This model is dimensionally interchangeable per ISO 15552, serving as a drop-in replacement for other ISO 15552 cylinders using the same PT3/8 port and mounting footprint.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X330S FAQ
At 0.5 MPa, the SE80X330S provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force is 3518 N. The maximum push force is 513 kgf at 1.0 MPa.
Yes, the SE80X330s is dimensionally interchangeable per ISO 15552, meaning it serves as a drop-in replacement for other ISO 15552 profile cylinders with matching 80 mm bore, 330 mm stroke, and PT3/8 port specifications.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X330S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.