Airtac SE80 Standard Cylinder SE80X465S
The AirTAC Airtac SE80 Standard Cylinder SE80X465S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 465mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke465 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X465S
The AirTAC SE80X465S is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It delivers a substantial 2513 N push force at 0.5 MPa and utilizes a PT3/8 port paired with a Ø25 mm rod. Because the barrel is extruded aluminum without external tie rods, it offers a compact, corrosion-resistant footprint that mounts flush in tight machine spaces.
This 80 mm bore unit includes a built-in magnet (-S) for seamless integration with AirTAC CMSE reed and DMSE electronic sensors. The field-adjustable air cushioning at both ends allows you to tune end-of-stroke deceleration precisely, protecting the 465 mm stroke mechanism from harsh mechanical impacts during high-speed 30-800 mm/s cycles.
Airtac SE80 Standard Cylinder SE80X465S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X465S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 465 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X465S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×465 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X465S Is Used
Injection Mold Clamping
Provides 2513 N of extend force at 0.5 MPa to secure injection mold halves during polymer injection cycles.
Press Brake Forming
Delivers steady 2268 N retract force to lift and return a small press brake tooling assembly over its 465 mm stroke.
Pallet Diversion
Uses the integrated CMSE sensor magnet to confirm position while pushing heavy loaded pallets onto a secondary transfer line.
Is the Airtac SE80 Standard Cylinder SE80X465S the Right Cylinder?
Stepping down to the 63 mm bore drops the 0.5 MPa push force to 1559 N, while moving up to the 100 mm bore increases it to 3927 N, giving you clear sizing boundaries for this 2513 N class. With a 465 mm stroke, the unsupported rod is highly susceptible to bending under lateral loads, so an external guide is strongly recommended to prevent premature rod-bearing wear. As a standard ISO 15552 cylinder, it is dimensionally interchangeable with other ISO 15552 profile cylinders, allowing direct drop-in retrofits using existing mounting hardware like FA or TC accessories.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X465S FAQ
The SE80X465S generates 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and a maximum of 513 kgf at 1.0 MPa. It features a PT3/8 air port and a 25 mm piston rod.
No, the SE80X465S is a double-acting cylinder that drifts when air is exhausted or a valve is centered. The adjustable air cushions only decelerate the piston near the stroke ends; they do not lock or hold loads. For position holding, consider a BSE rod-lock variant.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X465S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.