Airtac SE80 Standard Cylinder SE80X500SN
The AirTAC Airtac SE80 Standard Cylinder SE80X500SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 500mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke500 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X500SN
The AirTAC SE80X500SN is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It delivers a substantial 2513 N push force at 0.5 MPa and utilizes a 500 mm stroke. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machinery frames while resisting environmental contamination.
Equipped with an integrated magnet for non-contact position sensing, this unit pairs seamlessly with AirTAC CMSE reed and DMSE electronic switches. The NBR seal material provides reliable abrasion resistance for standard industrial temperatures, and the field-adjustable pneumatic cushioning at both stroke ends allows technicians to fine-tune end-of-stroke deceleration, preventing hard mechanical impacts during high-speed cycling.
Airtac SE80 Standard Cylinder SE80X500SN Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X500SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X500SN
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X500SN Is Used
Pallet Dispenser Ejection
Drives heavy wooden pallets out of a dispenser magazine, utilizing the 2513 N push force to overcome friction and reliably index the 500 mm stroke for downstream packaging lines.
Hydraulic Press Loader
Transfers heavy steel blanks into a hydraulic press, where the 80 mm bore's robust 3518 N extend force at 0.7 MPa ensures positive part seating before the forming cycle begins.
Corrugated Box Flap Folder
Actuates the heavy mechanical arms required to fold thick corrugated cardboard flaps on continuous case sealing machinery, relying on adjustable cushioning to soften the 500 mm stroke ends.
Is the Airtac SE80 Standard Cylinder SE80X500SN the Right Cylinder?
Selecting this 80 mm bore cylinder is ideal when your application requires the 2513 N push force at 0.5 MPa. If your load demands less energy, stepping down to the 63 mm bore yields a 1559 N push, whereas scaling up to the 100 mm bore provides a 3927 N push. Because the 500 mm stroke creates a long lever arm, you must account for side-load bending on the rod bearing; always incorporate an external guide to prevent premature seal wear.
For dimensionally interchangeable drop-in retrofits, this model conforms strictly to the ISO 15552 mounting interface. It features a PT3/8 port, a 25 mm rod with an M20x1.5 thread, and includes the -S magnet for sensor integration. Remember that the adjustable air cushion only decelerates the piston near stroke end; it cannot hold a load if air pressure is lost or the valve is centered.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X500SN FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE80X500SN is dimensionally interchangeable per ISO 15552 standards, allowing it to serve as a drop-in replacement for other ISO 15552 profile cylinders using identical mounting hardware. The integrated -S magnet also allows direct fitting of AirTAC CMSE and DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X500SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.