Airtac SE80 Standard Cylinder SE80X580S
The AirTAC Airtac SE80 Standard Cylinder SE80X580S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 580mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke580 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X580S
The AirTAC SE80X580S is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. Operating at 0.5 MPa, it generates 2513 N of push force and 2268 N of pull force, scaling up to a maximum output of 513 kgf at 1.0 MPa. The extruded aluminum barrel design omits external tie rods, yielding a compact, flush-mounting body that resists corrosion and simplifies sensor placement along its three integrated grooves.
Equipped with a built-in magnet (-S), this unit directly supports AirTAC CMSE reed and DMSE electronic position switches for precise end-of-stroke verification. The PT3/8 port and Ø25 mm rod handle substantial flow and side loads, while the field-adjustable air cushioning at both ends allows technicians to dial in deceleration and eliminate hard end-stop impacts during high-speed 30-800 mm/s cycles.
Airtac SE80 Standard Cylinder SE80X580S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X580S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 580 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X580S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×580 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X580S Is Used
Pallet Transfer Diversion
Leverages the 2513 N push force to deflect heavy loaded pallets from a main conveyor line onto a branch spur, utilizing the 580 mm stroke to clear the passing lane completely.
Corrugated Box Flap Folding
Uses the 80 mm bore's robust output and 580 mm extension to sweep large, oversized corrugated box flaps into position for hot-melt sealing without stalling under resistance.
Injection Mold Platen Ejector
Deploys the extended 580 mm stroke to reach deep into an injection molding machine, pushing finished plastic parts off the core block with reliable 2268 N retraction force.
Is the Airtac SE80 Standard Cylinder SE80X580S the Right Cylinder?
Choosing this 80 mm bore makes sense when a 63 mm cylinder (delivering 1559 N push at 0.5 MPa) is underpowered, but stepping up to a 100 mm bore (3927 N push) would be physically oversized and consume excessive air. The 580 mm stroke falls within the standard configuration limits, but at this extended length the bending moment on the Ø25 mm rod bearing increases significantly; for heavy off-center loads, incorporating an external guide rail prevents premature seal wear. As a true ISO 15552 profile cylinder, it serves as a drop-in dimensional replacement for any equivalent ISO 15552 unit, utilizing standard mounting accessories and matching the exact PT3/8 port interface.
Note that the adjustable pneumatic cushion only decelerates the piston near the stroke ends and does not function as a mechanical brake. If your application requires the load to be held statically in place without continuous air pressure, you must integrate an external pilot-operated check valve or transition to the AirTAC BSE rod-lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X580S FAQ
The SE80X580S delivers a push force of 2513 N and a pull force of 2268 N at 0.5 MPa. At 0.7 MPa, the push force increases to 3518 N, with an absolute maximum push capacity of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE80X580S is dimensionally interchangeable with any standard ISO 15552 profile cylinder. It shares the standardized mounting footprint and PT3/8 port locations, allowing you to drop it into existing machinery without modifying the frame, and it accepts standard AirTAC CMSE and DMSE sensors via the -S magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X580S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.