Airtac SE80 Standard Cylinder SE80X580SCBCR
The AirTAC Airtac SE80 Standard Cylinder SE80X580SCBCR is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 580mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke580 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X580SCBCR
The AirTAC SE80X580SCBCR is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding pneumatic tasks. It delivers a robust 2513 N push force at 0.5 MPa alongside a 2268 N pull force, utilizing an 80 mm bore and a 580 mm stroke. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal mechanics.
This unit includes a built-in magnet for CMSE reed and DMSE electronic position sensing, ensuring accurate end-of-stroke verification. The field-adjustable pneumatic cushioning at both ends allows technicians to fine-tune end-cap deceleration via a set screw, softening hard mechanical stops during high-speed 30-800 mm/s cycles. It is paired with a CB double clevis mounting accessory for pivoting load requirements.
Airtac SE80 Standard Cylinder SE80X580SCBCR Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X580SCBCR |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 580 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X580SCBCR
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×580 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X580SCBCR Is Used
Palletizer Case Pusher
Drives a 580 mm stroke to square and align heavy cardboard cartons on a palletizer line, utilizing the 2513 N push force to overcome box friction against side guides.
Press Brake Ejector
Ejects heavy formed metal sheets from a press brake bed, relying on the CB double clevis mount to accommodate the angular pivot as the arm sweeps the 580 mm length.
Bottle Diverter Arm
Actuates a sweeping diverter gate on a high-speed filling conveyor, using the integrated CMSE/DMSE magnet to confirm gate arrival and trigger the next product batch.
Is the Airtac SE80 Standard Cylinder SE80X580SCBCR the Right Cylinder?
When sizing this 80 mm bore actuator, consider stepping down to the 63 mm bore if your load requires less energy, as it provides 1559 N of push force at 0.5 MPa. If your application demands more thrust, the 100 mm bore offers 3927 N of push at 0.5 MPa. Because this model features a 580 mm stroke, the unsupported piston rod is prone to bending under heavy side loads; always incorporate an external guide rail to prevent premature rod-bearing wear. Remember that the adjustable air cushion only decelerates the piston near the stroke end and will not hold a load if air pressure is lost. For drop-in retrofits, this cylinder is dimensionally interchangeable with other ISO 15552 actuators, utilizing a PT3/8 port and M20x1.5 rod thread.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X580SCBCR FAQ
This 80 mm bore cylinder provides 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and a maximum push force of 513 kgf at 1.0 MPa. It operates at speeds ranging from 30 to 800 mm/s.
Yes, the SE80X580SCBCR is dimensionally interchangeable per ISO 15552 standards, matching standard mounting footprints, PT3/8 ports, and M20x1.5 rod threads for seamless hardware integration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X580SCBCR
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.