Airtac SE80 Standard Cylinder SE80X600SCBCR
The AirTAC Airtac SE80 Standard Cylinder SE80X600SCBCR is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 600mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke600 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X600SCBCR
The AirTAC SE80X600 is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 2513 N push force at 0.5 MPa. Its extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing standardized dimensions for universal hardware interchangeability.
Equipped with a built-in magnet for CMSE or DMSE position sensing, this 600 mm stroke unit integrates a CB double clevis mount for pivoting articulation. Field-adjustable air cushions at both ends allow technicians to tune end-of-stroke deceleration, protecting the mechanism from hard impacts during high-speed 30-800 mm/s cycles.
Airtac SE80 Standard Cylinder SE80X600SCBCR Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X600SCBCR |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X600SCBCR
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X600SCBCR Is Used
Pallet Transfer Diverter
Leverages the 2513 N push force and 600 mm stroke to divert heavy pallets between parallel conveyor lines, using the CB clevis to articulate smoothly with the transfer arm.
Corrugated Box Flap Folder
Utilizes the 30-800 mm/s speed range and adjustable cushioning to fold large corrugated box flaps at high cycle rates without slamming the end caps.
Injection Mold Platen Ejector
Employs the 80 mm bore and DMSE electronic sensor tracking to push molded components off a platen, relying on the tie-rod-free profile to sit flush in tight tooling bays.
Is the Airtac SE80 Standard Cylinder SE80X600SCBCR the Right Cylinder?
When sizing this 80 mm bore, compare its 2513 N push at 0.5 MPa against the 63 mm bore offering 1559 N, or step up to the 100 mm bore providing 3927 N for heavier loads. The CB clevis mount paired with the 600 mm stroke provides articulation, but long unsupported extensions create rod-bearing bending moments; an external guide is recommended to prevent side-load wear. If an application must hold a vertical load without live air pressure, note that this standard cylinder will drift, and a BSE rod lock variant is required.
As a true ISO 15552 profile cylinder, the SE80X600 serves as a drop-in replacement for other ISO 15552 cylinders, matching the exact 80 mm port (PT3/8), stroke, and mounting footprint. The -S magnet enables solid-state DMSE or reed CMSE sensor tracking without altering the housing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X600SCBCR FAQ
The 80 mm bore generates 2513 N push and 2268 N pull at 0.5 MPa. At 0.7 MPa, the push force is 3518 N. The maximum push force is 513 kgf at 1.0 MPa.
Yes, the SE80X600 is dimensionally interchangeable per ISO 15552, matching the PT3/8 port, 25 mm rod, and standard mounting dimensions for a direct retrofit without machining.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X600SCBCR
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.