Airtac SE80 Standard Cylinder SE80X630
The AirTAC Airtac SE80 Standard Cylinder SE80X630 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 630mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke630 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X630
The AirTAC SE80X630 is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It delivers a robust 2513 N of push force at 0.5 MPa and utilizes a PT3/8 port to drive high-volume airflow. The extruded aluminum barrel design omits external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames without creating dirt-trapping crevices.
This specific SKU lacks a built-in magnet, meaning it operates without position sensing out of the box. To manage kinetic energy across the 630 mm stroke, the cylinder incorporates field-adjustable pneumatic cushioning at both ends. By dialing in the cushion screws, you can precisely decelerate the piston to eliminate hard end-stop impacts, which is critical for preserving rod-bearing life during high-speed cycling.
Airtac SE80 Standard Cylinder SE80X630 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X630 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 630 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X630
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×630 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X630 Is Used
Pallet Transfer Line Diversion
Uses the 2513 N push force and 630 mm stroke to deflect heavy wooden pallets onto a secondary conveyor lane without stalling the main production flow.
Injection Mold Ejection
Provides the long 630 mm reach and 3518 N thrust at 0.7 MPa to safely push large molded plastic automotive dashboards out of a heavy press bed.
Automated Storage Crane Lift
Drives the vertical lifting axis in an AS/RS crane, moving goods to high-bay shelves where the smooth extruded profile prevents snagging on structural supports.
Is the Airtac SE80 Standard Cylinder SE80X630 the Right Cylinder?
Selecting this 80 mm bore yields 2513 N push at 0.5 MPa, sitting between the 63 mm bore (1559 N) and the 100 mm bore (3927 N). If your payload demands less force, stepping down to the 63 mm saves air consumption, while upgrading to the 100 mm provides a 56% thrust increase for heavier fixtures. Because this is a plain double-acting cylinder, it cannot hold a load statically if air pressure drops or a valve centers; the piston will drift. For fail-safe load holding, consider the BSE rod-lock variant. Furthermore, at 630 mm of stroke, the 25 mm rod is highly susceptible to bending under side loads—always guide the load externally to prevent premature seal failure. As a true ISO 15552 cylinder, it serves as a drop-in replacement for any standard ISO 15552 mounting footprint.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X630 FAQ
At 0.5 MPa, it provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N. The maximum push force is 513 kgf at 1.0 MPa, and the operating speed range is 30-800 mm/s.
Yes. The SE80X630 shares the exact ISO 15552 / VDMA 24562 mounting interface dimensions, making it a drop-in replacement for other ISO 15552 profile cylinders using the same mounting hardware and PT3/8 port.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X630
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.