Airtac SE80 Standard Cylinder SE80X750S
The AirTAC Airtac SE80 Standard Cylinder SE80X750S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 750mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke750 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X750S
The AirTAC SE80X750S is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. It generates 2513 N of push force at 0.5 MPa and accommodates a generous 750 mm stroke. The extruded aluminum barrel omits external tie rods, yielding a compact, flush-mounting body that resists corrosion and simplifies bracket installation along production lines.
Equipped with a built-in magnet (S option), this unit directly supports AirTAC CMSE reed and DMSE electronic position sensors for precise end-of-stroke verification. Field-adjustable pneumatic cushioning at both ends allows technicians to tune the deceleration of the 25 mm rod, softening hard impacts when cycling large loads at high speeds.
Airtac SE80 Standard Cylinder SE80X750S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X750S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X750S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X750S Is Used
Pallet Transfer Diversion
Leverages the 750 mm stroke and 2513 N push force to extend and divert heavy loaded pallets from a primary roller conveyor to a secondary packaging lane.
Corrugated Box Forming
Utilizes the adjustable end cushions to smoothly drive the 25 mm rod and fold large corrugated cardboard flaps without crushing the packaging material.
Press Brake Material Pusher
Deploys the long 750 mm reach to feed sheet metal blanks into a press brake, using the 513 kgf maximum thrust to seat heavy steel plates accurately.
Is the Airtac SE80 Standard Cylinder SE80X750S the Right Cylinder?
Selecting the SE80X750S is appropriate when your application requires substantial reach and power. If you need to step the force down, the 63 mm bore offers 1559 N of push at 0.5 MPa; stepping up to the 100 mm bore provides 3927 N. Because this cylinder features a 750 mm stroke, the extended 25 mm rod and M20x1.5 thread can generate significant bending moments under side loads—an external guide rail is strongly recommended to prevent premature rod-bearing wear.
This model uses a PT3/8 port and includes the S magnet for CMSE or DMSE sensors. Remember that a standard SE cylinder relies on continuous air pressure to maintain its position; it will drift if air is lost or the valve is centered. If your machine must hold a load safely during an exhaust or emergency stop, integrate an external pilot-operated check valve or specify a BSE rod-lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X750S FAQ
At 0.5 MPa, the SE80X750S provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE80X750S is dimensionally interchangeable per ISO 15552 standards. You can drop it in to replace other ISO 15552 profile cylinders using existing mounting hardware, and the built-in S magnet allows seamless integration with AirTAC CMSE or DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X750S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.