Airtac SE80 Standard Cylinder SE80X800SH
The AirTAC Airtac SE80 Standard Cylinder SE80X800SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 800mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke800 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X800SH
The AirTAC SE80X800SH is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty actuation. It delivers a robust 2513 N push force at 0.5 MPa and utilizes a PT3/8 port. The extruded aluminum barrel omits external tie rods, yielding a smooth, corrosion-resistant body that mounts flush in tight machine envelopes while resisting mechanical snagging.
This 800 mm stroke variant integrates a high-temperature FKM (Viton) seal, extending the operating range up to 150 C for demanding thermal environments. The S option provides a built-in magnet for CMSE reed and DMSE electronic position sensors, while the field-adjustable air cushion at both ends allows you to tune end-of-stroke deceleration for fast 30-800 mm/s cycles.
Airtac SE80 Standard Cylinder SE80X800SH Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X800SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X800SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X800SH Is Used
Pallet Stretch Wrapper
Drives the 800 mm vertical carriage of a rotary stretch wrapper, using the 2513 N push force to lift heavy palletized goods while the FKM seal withstands heat from film pre-stretch motors.
Injection Mold Ejection
Actuates the stripper plate in a 150 C hot runner mold assembly, leveraging the Viton seal and adjustable cushions to absorb heavy 3518 N impact forces at 0.7 MPa during rapid ejection.
Automated Sorter Diverter
Powers a long-stroke lane diverter on a high-speed parcel conveyor, using the integrated magnet with DMSE solid-state sensors to confirm full 800 mm extension in 30-800 mm/s sorting cycles.
Is the Airtac SE80 Standard Cylinder SE80X800SH the Right Cylinder?
Select this 80 mm bore when a 50 mm bore (982 N push @0.5 MPa) is underpowered, but you want to avoid stepping up to a 100 mm bore (3927 N push @0.5 MPa) that demands more air capacity. The 25 mm rod and M20x1.5 thread provide excellent structural rigidity for high side-load transmission. Because this is an 800 mm stroke, the unsupported rod bearing faces significant bending moments; you must use an external guide to prevent premature wear and piston drift.
As a standard ISO 15552 cylinder, it serves as a drop-in replacement for other ISO 15552 profile cylinders, sharing identical mounting footprint dimensions. Remember that a plain SE cylinder does not hold loads when air is exhausted or the valve is centered; if your process requires static holding without live pressure, specify a BSE rod lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X800SH FAQ
At 0.5 MPa, the 80 mm bore provides 2513 N push and 2268 N pull. At 0.7 MPa, the push force is 3518 N. The maximum push force is 513 kgf at 1.0 MPa operating pressure.
Yes. It is dimensionally interchangeable per ISO 15552, meaning it shares standard mounting interface dimensions with other ISO 15552 profile cylinders for easy retrofit. The built-in magnet works seamlessly with AirTAC CMSE reed and DMSE electronic sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X800SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.