Airtac SE80 Standard Cylinder SE80X80SH
The AirTAC Airtac SE80 Standard Cylinder SE80X80SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 80mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke80 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X80SH
The AirTAC SE80X80SH is a double-acting single-rod ISO 15552 profile cylinder engineered for high-temperature and heavy-duty operations. It delivers a robust 2513 N push force at 0.5 MPa and utilizes a PT3/8 port paired with a Ø25 mm hard-chrome rod. Equipped with a Viton (FKM) seal, this unit reliably operates in environments reaching up to 150 °C where standard elastomers would quickly degrade.
Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machinery. The integrated -S magnet allows seamless position detection using AirTAC CMSE reed or DMSE electronic sensors. Furthermore, the field-adjustable pneumatic cushioning at both ends can be precisely tuned via a screw to absorb kinetic energy and soften hard end stops during high-speed cycling.
Airtac SE80 Standard Cylinder SE80X80SH Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X80SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X80SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X80SH Is Used
Injection Mold Ejection
Survives the ambient heat near injection molding platens, using its 2513 N push force to positively eject heavy plastic parts without seal degradation.
Hot-Stamping Diverters
Handles high-temperature diverting tasks on metal packaging lines, where the FKM seal resists heat transfer from hot-stamped foil products.
Palletizing Head Stops
Acts as a robust physical stop for heavy pallets entering a wrapping station, using its 80 mm body and 36 mm cushioning to absorb repeated kinetic impacts.
Is the Airtac SE80 Standard Cylinder SE80X80SH the Right Cylinder?
Selecting this 80 mm bore provides a substantial 2513 N push at 0.5 MPa. If your assembly requires less force, stepping down to a 63 mm bore yields 1559 N; conversely, scaling up to a 100 mm bore provides 3927 N for heavier payloads. Because this is a double-acting cylinder, it does not hold its position or load if air pressure is lost or the valve centers—the piston will drift. For fail-safe load holding, consider the BSE rod-lock variant. As a true ISO 15552 profile cylinder, it serves as a dimensionally interchangeable drop-in replacement for other ISO 15552 cylinders, sharing standard mounting hardware and footprint.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X80SH FAQ
At 0.5 MPa, it provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force reaches 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552 standards, allowing it to drop into existing mounts. The 'H' designation indicates a Viton (FKM) seal, extending the operating temperature range from -20 °C to +150 °C, making it ideal for hot environments.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X80SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.