Airtac SE80 Standard Cylinder SE80X810S
The AirTAC Airtac SE80 Standard Cylinder SE80X810S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 810mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke810 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X810S
The AirTAC SE80X810S is a double-acting single-rod profile cylinder built to ISO 15552 dimensions, delivering a robust 2513 N push force at 0.5 MPa. Its 810 mm stroke is a non-standard made-to-order length designed for long-travel automation tasks. The extruded aluminum barrel lacks external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion.
Equipped with a built-in position magnet (-S), this unit supports AirTAC CMSE reed and DMSE electronic sensors for end-of-stroke detection. The field-adjustable pneumatic cushioning at both ends allows technicians to tune end-stop deceleration via a set screw, softening impacts when moving heavy loads at high speeds.
Airtac SE80 Standard Cylinder SE80X810S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X810S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 810 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X810S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×810 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X810S Is Used
Pallet Transfer Pusher
Uses the 2513 N thrust to index heavy loaded pallets between roller conveyor lanes over the 810 mm travel distance.
Automated Assembly Shuttle
Moves multi-part automotive subassemblies between robotic welding stations, relying on DMSE sensors for precise positioning.
Large Carton Erector
Actuates the folding arms of heavy-duty corrugated box machinery, utilizing the adjustable cushions to prevent hard stops.
Is the Airtac SE80 Standard Cylinder SE80X810S the Right Cylinder?
This 80 mm bore generates 2513 N of thrust at 0.5 MPa. If your application requires less force, the adjacent 63 mm bore offers 1559 N of push; stepping up to the 100 mm bore yields 3927 N. Because the 810 mm stroke exceeds the 1500 mm standard maximum, it is supplied as a non-standard configuration.
With an 810 mm stroke, the unsupported piston rod is highly susceptible to bending under side loads—always incorporate an external linear guide to prevent rod-bearing damage. Note that the adjustable air cushion only decelerates the piston near stroke end; it cannot hold a load vertically. If unpowered load holding is required, specify a BSE rod-lock variant or an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X810S FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At 0.7 MPa, the push force reaches 3518 N. The maximum rated push force is 513 kgf at 1.0 MPa operating pressure.
Yes, the SE80X810S shares the standardized ISO 15552 / VDMA 24562 mounting interface and PT3/8 port, making it dimensionally interchangeable with other ISO 15552 profile cylinders for retrofitting. You can reuse existing mounting hardware like FA or FB flanges.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X810S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.