Airtac SE80 Standard Cylinder SE80X860S
The AirTAC Airtac SE80 Standard Cylinder SE80X860S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 860mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke860 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X860S
The AirTAC SE80X860S is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. It delivers a robust 2513 N push force at 0.5 MPa, utilizing an 80 mm bore and a lengthy 860 mm stroke. Because this stroke exceeds the standard maximum of 1500 mm for this bore, it is manufactured as a made-to-order unit to precisely fit your extended-travel machinery.
This model features a square extruded aluminum barrel without external tie rods, creating a compact and corrosion-resistant profile that mounts flush against machine frames. Equipped with a built-in magnet (-S), it seamlessly integrates with AirTAC CMSE reed and DMSE electronic sensors for precise end-position detection. The field-adjustable pneumatic cushioning at both ends allows technicians to tune the deceleration via a set screw, softening hard end stops during high-speed operations.
Airtac SE80 Standard Cylinder SE80X860S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X860S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 860 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X860S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×860 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X860S Is Used
Pallet Transfer Ejector
Uses the 2513 N push force at 0.5 MPa to eject heavy loaded pallets from a roller conveyor line, relying on the 860 mm stroke to fully clear the transfer zone.
Injection Mold Platen
Provides the extended 860 mm travel required to open large injection molding safety doors, utilizing the -S magnet and DMSE sensors to confirm door closure for machine safety interlocks.
Automated Press Deflashing
Drives a deflashing blade deep into a large automotive cast part, leveraging the 80 mm bore's 3518 N push at 0.7 MPa to cleanly shear excess flash from hard-to-reach cavities.
Is the Airtac SE80 Standard Cylinder SE80X860S the Right Cylinder?
Selecting the SE80X860S is appropriate when your application requires substantial thrust over a long reach. If you need to step the force down, the adjacent 63 mm bore provides 1559 N of push at 0.5 MPa; conversely, stepping up to the 100 mm bore yields 3927 N at the same pressure. Because this cylinder uses a PT3/8 port and an M20x1.5 rod thread, ensure your pneumatic fittings and mechanical couplings match these specifications exactly.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a drop-in replacement for other ISO 15552 profile cylinders, sharing standard mounting accessories like FA front flanges or TC center trunnions. Note that the 860 mm stroke creates a long unsupported rod extension; to prevent rod-bearing bending and premature seal wear under side load, you must incorporate an external guide rail. Furthermore, the adjustable air cushion only decelerates the piston near stroke end—it does not hold the load. If position holding is required upon air loss, a BSE rod lock variant or external pilot-operated check valve is necessary.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X860S FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N. The absolute maximum push capacity is 513 kgf when operated at the 1.0 MPa pressure limit.
Yes, it is dimensionally interchangeable per ISO 15552 standards. You can use it as a drop-in replacement for other ISO 15552 profile cylinders, provided your mounting hardware and PT3/8 port connections align. Its square extruded barrel has no external tie rods, ensuring a compact retrofit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X860S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.