Airtac SE80 Standard Cylinder SE80X900
The AirTAC Airtac SE80 Standard Cylinder SE80X900 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 900mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke900 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X900
The AirTAC SE80X900 is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 2513 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact body that mounts flush and resists corrosion while housing integrated sensor grooves on three sides.
Because this specific SKU lacks the -S magnet code, it is not equipped for direct CMSE or DMSE position sensing out of the box. The field-adjustable pneumatic cushioning at both ends allows technicians to fine-tune end-of-stroke deceleration via a set screw, softening hard impacts when driving heavy loads across its 900 mm travel.
Airtac SE80 Standard Cylinder SE80X900 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X900 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X900
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X900 Is Used
Pallet Transfer Diversion
Uses the 2513 N extend force to push heavy timber pallets cleanly across a transfer chain, relying on the 900 mm stroke to clear the conveyor lane completely.
Injection Mold Ejection
Drives a secondary ejector arm on a large injection molding press, where the adjustable end cushion safely decelerates the 80 mm piston over long mold depths.
Bulk Carton Sorting
Actuates a sweeping pusher arm in high-speed logistics to divert heavy bulk cartons, utilizing the no-tie-rod profile to fit tight machine clearances.
Is the Airtac SE80 Standard Cylinder SE80X900 the Right Cylinder?
Stepping down to a 63 mm bore drops the 0.5 MPa push output to 1559 N, whereas moving up to a 100 mm bore increases it to 3927 N, letting you scale thrust precisely to the load. With a 900 mm stroke, the 25 mm rod and internal bearing face significant bending moments under side loading; an external guide rail is strongly recommended to prevent premature seal wear. This cylinder is dimensionally interchangeable per ISO 15552, serving as a direct drop-in replacement for other ISO 15552 cylinders using standard PT3/8 ports and mounting hardware. Remember that a standard SE does not hold its position if air pressure is lost; integrate a BSE rod lock for fail-safe load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X900 FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force reaches 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. It operates at speeds of 30-800 mm/s and features a PT3/8 port.
This specific SKU does not include a sensor magnet, so CMSE or DMSE electronic switches will not function without modification. Dimensionally, it is a true ISO 15552 profile cylinder, making it interchangeable with other ISO 15552 cylinders and standard mounting accessories without requiring machine redesign.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X900
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.