Airtac SE80 Standard Cylinder SE80X900H
The AirTAC Airtac SE80 Standard Cylinder SE80X900H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 900mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke900 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X900H
The AirTAC SE80X900H is a double-acting ISO 15552 profile cylinder engineered for demanding high-temperature environments. Equipped with a Viton (FKM) seal, it withstands operating temperatures up to 150 C while delivering a robust 2513 N push force at 0.5 MPa across its 900 mm stroke. The extruded aluminum barrel lacks external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machinery frames.
This unit features field-adjustable air cushioning at both ends to decelerate the piston smoothly, preventing hard end-stop impacts at high cycling speeds. Note that this specific SKU omits the built-in magnet, meaning it is not equipped for AirTAC CMSE or DMSE position sensing without modification. The standardized ISO 15552 mounting interface ensures true dimensional drop-in compatibility with other standard profile cylinders.
Airtac SE80 Standard Cylinder SE80X900H Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X900H |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X900H
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X900H Is Used
Steel Mill Ejection
Survives ambient heat near slab casting lines using its 150 C FKM seal, providing 2513 N of push to eject hot steel components over a 900 mm reach.
Automotive Paint Curing Oven
Transfers chassis skids through a 900 mm stroke inside a heated curing oven, relying on the Viton seal to resist thermal degradation.
Palletizer Film Roll Feed
Feeds heavy stretch-wrap film rolls into automated pallet wrapping stations, utilizing the 3518 N push force at 0.7 MPa to shift substantial mass.
Is the Airtac SE80 Standard Cylinder SE80X900H the Right Cylinder?
Selecting this 80 mm bore makes sense when substantial thrust is required; it provides 2513 N of push force at 0.5 MPa. If your application requires less force, stepping down to the 63 mm bore yields 1559 N of push, while stepping up to the 100 mm bore provides 3927 N for heavier loads. Keep in mind that a standard SE cylinder relies on live air pressure to maintain its position; if air is lost or the valve is centered, the piston will drift and cannot hold a load. For positive holding, consider the BSE rod lock variant.
Because this model features a 900 mm stroke, the unsupported rod length introduces a risk of bending under side loads. Even with the sturdy Ø25 mm rod and M20x1.5 thread, it is highly recommended to use an external guide rail to prevent premature rod-bearing wear and cylinder failure.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X900H FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force reaches 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE80X900H is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards, meaning it shares the exact same mounting footprint and port locations (PT3/8) as comparable profile cylinders from other manufacturers, allowing for a seamless retrofit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X900H
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.