Airtac SE80 Standard Cylinder SE80X900SLB
The AirTAC Airtac SE80 Standard Cylinder SE80X900SLB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 900mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke900 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X900SLB
The AirTAC SE80X900SLB is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 2513 N push force at 0.5 MPa. Its extruded aluminum barrel omits external tie rods, yielding a flush exterior that simplifies mounting and resists corrosion in demanding industrial settings.
Equipped with a built-in position magnet, this unit supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable pneumatic cushioning at both ends allows technicians to tune deceleration, softening hard impacts during high-speed operations.
Airtac SE80 Standard Cylinder SE80X900SLB Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X900SLB |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X900SLB
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X900SLB Is Used
Pallet Transfer Diversion
Leverages the 900 mm stroke to push heavy wooden pallets cleanly off a main packaging line onto a bypass spur without requiring complex multi-stage actuators.
Corrugated Box Flap Folding
Uses the 2513 N extend force to positively fold thick cardboard flaps on automated carton sealers, ensuring square closure before tape application.
Injection Mold Part Ejection
Deploys the DMSE electronic sensor signal to trigger the positive ejection of dense plastic automotive interior panels from heavy injection molds.
Is the Airtac SE80 Standard Cylinder SE80X900SLB the Right Cylinder?
Delivering 2513 N of push at 0.5 MPa, this 80 mm bore fits mid-to-heavy tasks. If your application is lighter, the 63 mm neighbor provides 1559 N of push; stepping up to the 100 mm bore yields 3927 N for heavier loads. For drop-in retrofits, match the 80 mm bore, 900 mm stroke, PT3/8 port, and LB foot mounting accessory.
Because this unit features a 900 mm stroke, the extended rod is susceptible to bending under lateral loads—always pair it with an external guide to prevent rod-bearing damage. Note that the adjustable air cushion only decelerates the piston near stroke end; it cannot hold a load if air pressure drops. For position holding, consider a BSE rod lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X900SLB FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At 0.7 MPa, the push force reaches 3518 N, with a maximum push of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE80X900SLB is a true ISO 15552 profile cylinder, making it dimensionally interchangeable with other ISO 15552 cylinders. It features a PT3/8 port, a 25 mm rod, and an LB foot mount for straightforward retrofitting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X900SLB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.