verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ100X40-30S

The AirTAC SEJ Adjustable Cylinder SEJ100X40-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø100mm unit covers an effective stroke of 10–40mm without changing cylinders. Force is equal in both directions.

  • BoreØ100 mm
  • Nominal stroke40 mm
  • Adjust window30 mm
  • Effective stroke10–40 mm
  • Port sizePT1/2
  • CushionAdjustable, 36 mm
$181.88 $189.38Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ100 stroke, mounting and version on one page All SEJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ100X40-30S

The AirTAC SEJ100X40-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30 mm mechanical stroke adjustment. A stop screw on the rear rod lets you dial the retract end position, providing an effective stroke range of 10 to 40 mm for precise machine commissioning.

This extruded aluminum barrel omits external tie rods for a clean profile and includes field-adjustable air cushions at both ends to decelerate the load near stroke end. The built-in magnet (-S) supports CMSE reed and DMSE electronic sensors for position feedback. It operates at speeds from 30 to 800 mm/s with a PT1/2 port and a Ø25 mm rod.

Airtac SEJ Adjustable Cylinder SEJ100X40-30S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ100X40-30S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ100 mm
Nominal stroke40 mm
Adjustment window30 mm (10–40 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM20×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø100mm)

PressureForce (both directions)
0.5 MPa3682 N
0.7 MPa5154 N
Max (@1.0 MPa)751 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ100X40-30S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
100Bore size in mm.
×40Nominal stroke length in mm.
-30Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ100X40-30S Is Used

precision_manufacturing

Press Die Clearance

Dial the 30 mm stop screw to set exact die closure heights on a stamping press, using the 5153 N retract force to consistently hold heavy tooling.

swap_horiz

Packaging Changeover

Fine-tune the folding arm end position within the 10 to 40 mm effective range when switching between different carton sizes on a packaging line.

straighten

Welding Head Placement

Adjust the double-rod stroke to trial-position a welding head precisely against varied joint geometries without swapping out cylinder hardware.

Is the Airtac SEJ Adjustable Cylinder SEJ100X40-30S the Right Cylinder?

Verify the 30 mm adjustment window covers your required positioning range, giving a usable 10 to 40 mm stroke. If you need less force, stepping down to the 80 mm bore provides 2268 N at 0.5 MPa; stepping up to the 125 mm bore yields 5734 N. If the end position never changes after commissioning, a fixed-stroke SED cylinder is sufficient. Note that the air cushion and stop screw only set the mechanical end and decelerate the load; they do not hold position on air loss. For fail-safe holding, use an external rod lock. When replacing an ISO 15552 cylinder, match the 100 mm bore, 40 mm nominal stroke, PT1/2 port, and mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).

AirtacDistr lists every SEJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-sej100-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (30mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 30mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ100X40-30S FAQ

A stop screw on the rear rod mechanically shortens the retract stroke over a 30 mm window. This gives an effective stroke range of 10 to 40 mm. You lock the screw after setting the exact end position required on the machine.

Because it is a double-rod cylinder, the force is equal in both directions. It provides 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ100X40-30S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ100X40-30S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.