
The AirTAC SEJ Adjustable Cylinder SEJ32X125-50SN is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø32mm unit covers an effective stroke of 75–125mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X125-50SN is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50 mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas for equal force and speed in both directions. You can dial the retract end from 75 mm up to the nominal 125 mm, providing a mechanical stop screw to lock the exact end-position during machine commissioning.
Delivering 345 N each way at 0.5 MPa, this NBR-sealed unit includes a magnet for CMSE or DMSE sensors. The extruded aluminum barrel omits external tie rods, and field-adjustable air cushions at both ends decelerate the load near stroke end without acting as a fail-safe lock.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X125-50SN |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 125 mm |
| Adjustment window | 50 mm (75–125 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×125 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dialing the 50 mm retract window lets you fine-tune the exact 75-125 mm dispensing distance for varying adhesive bead sizes during machine commissioning.
Adjusting the mechanical stop screw on the back rod quickly sets new end-positions to handle different package heights without swapping out cylinder hardware.
Leveraging the 345 N both-way force and adjustable end-stop allows precise trial positioning of lightweight electronic components before finalizing the layout.
This 32 mm bore provides 345 N both-way force at 0.5 MPa; if your application needs less force, the adjacent smaller bore is not available in this series, but if you need more power, step up to the 40 mm bore which provides 528 N both ways. Confirm the 50 mm adjustment window covers your exact positioning range before selecting. If a fixed end-position is sufficient and mechanical adjustability is unnecessary, a standard SED double-rod cylinder offers a simpler setup. Remember that a plain SEJ does not hold position on air loss; for fail-safe holding, specify a BSED or an external rod lock. When replacing an ISO 15552 unit, match the 32 mm bore, 125 mm nominal stroke, PT1/8 port, and mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
AirtacDistr lists every SEJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sej32-adjustable-cylinder
Quick checklist
The 50 mm adjustment window allows you to mechanically dial the retract stroke from a minimum effective stroke of 75 mm up to the nominal 125 mm, which is ideal for fine-tuning end positions on the machine.
Because the rod exits both ends, force is identical in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.