
The AirTAC SE32 Standard Cylinder SE32X125 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 125mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE32X125 is a double-acting single-rod profile cylinder built to ISO 15552 standards. It delivers a push force of 402 N and a pull force of 345 N at 0.5 MPa, making it well-suited for compact automation tasks requiring a 125 mm stroke.
Its square extruded aluminum barrel eliminates external tie rods, allowing for flush mounting and high corrosion resistance in tight spaces. The field-adjustable pneumatic cushioning at both ends can be tuned via a setscrew to soften end-of-stroke impacts, ensuring smooth deceleration rather than relying on a fixed bumper.
| Model | Airtac SE32 Standard Cylinder SE32X125 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 402 N push force needed to feed printed circuit boards through a routing saw, utilizing the 125 mm stroke to clear the cutting blade during retraction.
Actuates a mechanical arm to tuck minor flaps on small product cartons, where the compact 32 mm profile barrel fits neatly between conveyor guide rails.
Ejects processed vials from a testing carousel using its 125 mm stroke, relying on adjustable end cushions to prevent glass breakage during high-speed ejection.
This 32 mm bore provides 402 N of push force at 0.5 MPa. If your application requires less power, you would need to step down to a smaller frame, but as the smallest standard ISO 15552 size, moving up to the 40 mm bore increases your push force to 628 N. Because this specific SKU lacks the -S magnet, it cannot host CMSE or DMSE position sensors; if your sequence requires end-of-stroke confirmation, select the SE32X125S variant instead. Keep in mind that the adjustable air cushion only decelerates the piston near stroke end and does not hold the load if air pressure is lost.
Dimensionally interchangeable with other ISO 15552 cylinders, this model features a PT1/8 port and an M10x1.25 rod thread. It accepts standard mounting accessories like FA front flanges or LB foot brackets, making it a straightforward retrofit for existing machinery.
AirtacDistr lists every SE32 order code with its price on one page at https://airtacdistr.com/products/airtac-se32-iso-air-cylinder
Quick checklist
The SE32X125 generates a push force of 402 N and a pull force of 345 N at 0.5 MPa, a push force of 563 N at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It uses a PT1/8 port and operates at speeds between 30 and 800 mm/s.
Yes, the SE32X125 is dimensionally interchangeable with other ISO 15552 profile cylinders, meaning it shares the exact same mounting footprint and rod thread dimensions. You can use your existing mounting hardware, though you should confirm the port thread form matches your current setup.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.