Airtac SE32 Standard Cylinder SE32X100
The AirTAC Airtac SE32 Standard Cylinder SE32X100 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 100mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke100 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X100
The AirTAC SE32X100 is a double-acting single-rod ISO 15552 profile cylinder engineered for compact pneumatics. Delivering 402 N of push force at 0.5 MPa, it suits light-duty positioning and clamping. The square extruded aluminum barrel eliminates external tie rods, yielding a flush, corrosion-resistant body that mounts cleanly in tight machine envelopes.
This 32 mm bore unit features field-adjustable air cushioning at both ends to soften end-of-stroke impacts, functioning as a true deceleration valve rather than a fixed bumper. Because this specific SKU lacks the -S magnet code, it is not equipped for integrated CMSE or DMSE position sensing out of the box.
Airtac SE32 Standard Cylinder SE32X100 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X100 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X100
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X100 Is Used
PCB Drill Clamping
Provides 402 N of push force at 0.5 MPa to secure small printed circuit boards within electronic drilling and routing fixtures.
Carton Flap Folding
Drives lightweight cardboard flap folders on packaging lines, utilizing the 100 mm stroke for precise, compact actuation.
Lab Sample Dispensing
Actuates small-volume fluid dispensing valves in analytical lab equipment where a clean, tie-rod-free aluminum profile prevents contamination.
Is the Airtac SE32 Standard Cylinder SE32X100 the Right Cylinder?
Generating 402 N push at 0.5 MPa, this bore is ideal for compact assemblies. If your application requires less force, the nearest step down is a 25 mm bore (not part of the SE series), but if you need more power, stepping up to the 40 mm bore yields 628 N push. As a standard ISO 15552 profile cylinder, it serves as a drop-in dimensional replacement for other ISO 15552 cylinders, sharing standardized mounting hardware. Remember that a plain SE cylinder relies on live air pressure to hold a load; if air is lost, the piston drifts, so use a BSE rod lock for fail-safe holding. The 100 mm stroke is well below the 300 mm threshold where side-load bending becomes a critical concern, but always ensure the load is guided externally for optimal bearing life.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X100 FAQ
The SE32X100 generates 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum of 82 kgf at 1.0 MPa. It operates at speeds of 30-800 mm/s.
Yes, its ISO 15552 dimensions make it interchangeable with other ISO 15552 profile cylinders. This specific SKU lacks the -S magnet, so it cannot support CMSE or DMSE sensors without modification; it uses a PT1/8 port.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.