
The AirTAC SEJ Adjustable Cylinder SEJ32X200-100H is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø32mm unit covers an effective stroke of 100–200mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X200-100H is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100 mm adjustable stroke window. The retract end stop screw lets you dial the effective stroke anywhere from 100 mm up to 200 mm.
Built with FKM Viton seals, this unit handles a wider -20 to +150 C temperature range. It uses a PT1/8 port, a 12 mm rod with an M10x1.25 thread, and includes field-adjustable air cushions at both ends to manage deceleration. Note this SKU lacks a magnet, so CMSE or DMSE position sensors cannot be mounted.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X200-100H |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 200 mm |
| Adjustment window | 100 mm (100–200 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 100 mm retract window to perfectly match varying part heights on a pick-and-place head, using the equal 345 N both-way force for consistent grip and release.
Set the exact end-of-stroke stop for a packaging flap folder during line commissioning, locking the back-rod screw once the 100-200 mm range is optimized.
Adjust the stroke on the fly when switching a conveyor sorting diverter between different product sizes without swapping out the entire cylinder hardware.
This 32 mm bore gives 345 N both ways at 0.5 MPa. If your application needs less force, step down is not an option as 32 mm is the smallest available. If you need more power, the next bore up is 40 mm delivering 528 N each way. If your end position never changes after commissioning, a fixed-stroke SED cylinder is a simpler alternative.
The 100 mm adjustment window is excellent for fine-tuning end positions on the machine. The adjustable air cushion only decelerates the load near stroke end; it is not a mechanical lock. A plain SEJ will not hold position on air loss, so for fail-safe holding you need an external rod lock or a BSED variant. Since the 200 mm stroke is under 300 mm, side-load concerns are minimal, but always ensure external guides for heavy loads.
AirtacDistr lists every SEJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sej32-adjustable-cylinder
Quick checklist
A stop screw on the back rod mechanically shortens the retract stroke over a 100 mm window. You can dial the effective stroke anywhere from 100 mm up to the full 200 mm, then lock it in place.
Because the rod exits both ends, the force is identical in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.