
The AirTAC SEJ Adjustable Cylinder SEJ32X250-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø32mm unit covers an effective stroke of 200–250mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X250-50S is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, yielding identical annulus areas so output force is equal in both directions at about 345 N each way at 0.5 MPa. The extruded aluminum barrel contains no external tie rods, ensuring clean ISO 15552 dimensional interchangeability.
This S-suffix model includes a magnet for position detection and features a 50 mm adjustable stroke window. A mechanical stop screw on the back rod lets you dial the retract end down, giving an effective stroke range of 200-250 mm. Field-adjustable air cushions at both ends decelerate the load near stroke end.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X250-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 250 mm |
| Adjustment window | 50 mm (200–250 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×250 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 200-250 mm end position during machine commissioning to precisely set a stop without machining new hardware.
Adjust the retract stroke on the fly to accommodate varying part heights on a packaging conveyor, ensuring correct 345 N clamping force.
Fine-tune the approach distance in a test fixture, locking the back-rod stop screw once the optimal travel is found.
This 32 mm bore provides 345 N both-way force at 0.5 MPa (483 N at 0.7 MPa). If your application needs less force, the adjacent 32 mm bore is the smallest standard ISO size. If you require more power, stepping up to the 50 mm bore yields 825 N both-way force at 0.5 MPa. If your end position never varies, a fixed-stroke SED cylinder is sufficient. For stroke lengths of 250 mm or more, use external guides to prevent rod side-loading. The adjustable air cushion decelerates loads but is not a locking brake; for fail-safe position holding on air loss, specify an external rod lock. Verify your ISO replacement matches the PT1/8 port, M10x1.25 rod thread, and mounting subset (Basic, FA, LB, TC, FTC, TCM1, TCM2).
AirtacDistr lists every SEJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sej32-adjustable-cylinder
Quick checklist
A stop screw on the back rod mechanically shortens the retract stroke over a 50 mm window. You can dial the effective stroke anywhere from 200 mm up to 250 mm, then lock it in place.
Because the rod exits both ends, force is equal in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, with a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.