verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ32X300-100S

The AirTAC SEJ Adjustable Cylinder SEJ32X300-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø32mm unit covers an effective stroke of 200–300mm without changing cylinders. Force is equal in both directions.

  • BoreØ32 mm
  • Nominal stroke300 mm
  • Adjust window100 mm
  • Effective stroke200–300 mm
  • Port sizePT1/8
  • CushionAdjustable, 27 mm
$92.09 $99.59Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ32 stroke, mounting and version on one page All SEJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ32X300-100S

The AirTAC SEJ32X300-100S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100 mm mechanical stroke adjustment window. A stop screw on the rear rod lets you dial the retract end down, yielding an effective stroke range of 200 to 300 mm without swapping hardware.

This 32 mm bore unit includes a magnet (-S) for position sensing and uses adjustable air cushions at both ends to decelerate the load near stroke ends. The extruded aluminum barrel contains no external tie rods, ensuring clean ISO 15552 dimensional interchangeability. Note that the 300 mm stroke length places higher leverage on the 12 mm rod, so external guides are recommended to manage side loading.

Airtac SEJ Adjustable Cylinder SEJ32X300-100S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ32X300-100S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ32 mm
Nominal stroke300 mm
Adjustment window100 mm (200–300 mm)
ConfigurationDouble rod, double acting
Port sizePT1/8
Rod threadM10×1.25
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø32mm)

PressureForce (both directions)
0.5 MPa346 N
0.7 MPa484 N
Max (@1.0 MPa)70 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ32X300-100S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
32Bore size in mm.
×300Nominal stroke length in mm.
-100Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ32X300-100S Is Used

tune

Dispenser Probe Calibration

Dial the retract stop to perfectly set a 250 mm probe plunge depth on an adhesive dispensing machine, leveraging the 100 mm window for precise 345 N positioning.

swap_horiz

Packaging Changeover

Adjust the stroke between 200 mm and 300 mm on the fly to accommodate different carton sizes without changing cylinder hardware, using equal both-way force.

precision_manufacturing

Trial Part Positioning

Fine-tune the end stop during CNC fixture prototyping to find the optimal clamping distance, locking the rear rod screw once the exact position is set.

Is the Airtac SEJ Adjustable Cylinder SEJ32X300-100S the Right Cylinder?

Confirm this 100 mm adjustment window covers your required end-position variance. If you need less fine-tune range, step down to the 20 mm or 50 mm window variants. For higher force demands, the next bore up is 40 mm (739 N both ways at 0.7 MPa); if you need less force, there is no smaller SEJ bore, so consider a fixed-stroke SED if adjustability is not required. A plain SEJ does not hold position on air loss; for fail-safe holding, specify a BSED or an external rod lock. When replacing an ISO 15552 cylinder, verify the 200-300 mm effective range, PT1/8 port, and mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2).

AirtacDistr lists every SEJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sej32-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (100mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 100mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ32X300-100S FAQ

A stop screw on the rear rod mechanically shortens the retract stroke over a 100 mm window. For a 300 mm nominal stroke, you can set the effective stroke anywhere from 200 mm up to 300 mm, then lock the screw in place.

Because it is a double-rod cylinder, force is equal in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ32X300-100S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ32X300-100S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.