
The AirTAC SEJ Adjustable Cylinder SEJ32X300-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø32mm unit covers an effective stroke of 280–300mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X300-20S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so output force is equal in both directions at 345 N (0.5 MPa). You can dial the retract end from 280mm to 300mm to perfectly match a mechanical stop without changing hardware.
This unit includes a magnet for position sensing and uses an extruded aluminum barrel with no external tie rods. It carries field-adjustable air cushions at both ends to manage deceleration over the 300mm travel.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X300-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 300 mm |
| Adjustment window | 20 mm (280–300 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×300 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 280-300mm retract stop to precisely cut lead lengths on automated PCB routing stations without swapping physical spacers.
Adjust the stroke end on the fly when a packaging line switches carton sizes, using the 345 N both-way force to push folding flaps.
Fine-tune the exact retraction point of a fluid dispensing head during machine commissioning, locking the 20mm stop screw once aligned.
Verify the 20mm adjustment window covers your required end-position variance. If you need less force, there is no smaller SEJ bore, so you must reduce pressure. If you need more force, step up to the 40mm bore which provides 528 N both ways at 0.5 MPa. If your stroke is fixed and never requires fine-tuning, a standard SED double-rod cylinder saves length and weight.
Because this 300mm stroke exceeds the 10x bore ratio, use external guides to prevent side-loading damage to the 12mm rod and seals. Note that the adjustable cushion and stop screw decelerate the load but do not hold position on air loss; for fail-safe holding, specify an external rod lock. This cylinder is dimensionally interchangeable per ISO 15552, so confirm your mounting bracket (Basic, FA, LB, TC, FTC, TCM1, TCM2) and PT1/8 port match your existing fixture.
AirtacDistr lists every SEJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sej32-adjustable-cylinder
Quick checklist
A stop screw on the back rod mechanically shortens the retract stroke by up to 20mm. For this SEJ32X300-20S model, the effective stroke range is 280-300mm. You dial the end position during commissioning and lock the screw in place.
Because it is a double-rod cylinder, force is identical in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa. The -S option includes a magnet for use with CMSE reed or DMSE electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.