
The AirTAC SEJ Adjustable Cylinder SEJ32X300-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø32mm unit covers an effective stroke of 270–300mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X300-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30 mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions. This provides an equal force of 345 N each way at 0.5 MPa, eliminating speed discrepancies between extend and retract motions.
You can dial the retract end-position up to 30 mm via a mechanical stop screw on the back rod, yielding an effective stroke range of 270-300 mm. Equipped with a magnet (-S), it supports CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The extruded aluminum barrel contains no external tie rods, ensuring a clean profile that is dimensionally interchangeable per ISO 15552.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X300-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 300 mm |
| Adjustment window | 30 mm (270–300 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×300 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 270-300 mm clamping position on a small pneumatic press, utilizing the 345 N both-way force to maintain consistent pressure during assembly.
Adjust the retract stop to accommodate different product heights on a packaging line, using the 30 mm window to rapidly reset end positions without changing cylinder hardware.
Fine-tune the extension endpoint during robotic pick-and-place commissioning, locking the back-rod stop screw once the optimal 300 mm reach is achieved.
This 30 mm adjustment window is ideal for fine-tuning a 300 mm end position during machine commissioning or matching variable stop points without swapping hardware. After setting your position, lock the stop screw to prevent drift. If you need less force, stepping down to a bore 25 mm is not an option in this series, but if your application requires more thrust, the next bore up (40 mm) provides 528 N both ways at 0.5 MPa.
Because the stroke is 300 mm, use external guides to manage side loading and prevent rod binding. The field-adjustable air cushion at both ends decelerates the load near stroke end but does not hold position on air loss; for fail-safe holding, consider an external rod lock. Ensure your replacement matches the PT1/8 port, M10x1.25 rod thread, and the desired mounting subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). If you do not need stroke adjustability, a fixed-stroke SED is sufficient.
AirtacDistr lists every SEJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sej32-adjustable-cylinder
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke over a 30 mm window. You can dial the effective stroke anywhere from 270 mm up to the nominal 300 mm, then lock the screw in place.
Because the rod exits both ends, force is equal in both directions. It generates 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.