
The AirTAC SEJ Adjustable Cylinder SEJ32X300-50 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø32mm unit covers an effective stroke of 250–300mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X300-50 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions. This provides an equal force of 345 N each way at 0.5 MPa, ensuring perfectly balanced push and pull dynamics.
You can dial the retract end from 250mm up to the nominal 300mm via a stop screw on the back rod. This allows precise mechanical tuning of the end position directly on your machine. The extruded aluminum barrel has no external tie rods, and field-adjustable air cushions at both ends decelerate the load near stroke end.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X300-50 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 300 mm |
| Adjustment window | 50 mm (250–300 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×300 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 250-300mm retract stop to precisely position a packaging flap folder, using the 345N both-way force to push and pull consistently.
Swap the effective stroke by 50mm without changing hardware when switching a conveyor line between different product heights.
Fine-tune the end position during a small pneumatic press commissioning to find the exact 250-300mm contact point for delicate assembly.
This 50mm adjustment window is ideal if you need to fine-tune a 250-300mm end position during commissioning or changeovers. If you need less force, step down to a bore 25 unit (not in this series), or if you require more power, step up to the SEJ40X300-50 which yields 528 N both ways at 0.5 MPa. If your stroke never changes, a fixed-stroke SED is sufficient.
Because the stroke is 300mm, use external guides to prevent side loading on the 12mm rod. Note that this plain SEJ does not hold position on air loss; the cushion and stop screw only set the mechanical end and decelerate, so use an external rod lock for fail-safe holding. This SKU lacks a magnet, so you cannot mount CMSE or DMSE sensors. It is dimensionally interchangeable per ISO 15552 using the PT1/8 port and your chosen mounting from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
AirtacDistr lists every SEJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sej32-adjustable-cylinder
Quick checklist
The retract stroke can be dialed in over a 50mm window, giving an effective stroke range of 250mm to the nominal 300mm. You set the exact end position via a stop screw on the back rod, then lock it in place.
Because it is a double-rod cylinder, the force is equal in both directions. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa. The operating speed is 30-800 mm/s.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.