verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ32X300-50S

The AirTAC SEJ Adjustable Cylinder SEJ32X300-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø32mm unit covers an effective stroke of 250–300mm without changing cylinders. Force is equal in both directions.

  • BoreØ32 mm
  • Nominal stroke300 mm
  • Adjust window50 mm
  • Effective stroke250–300 mm
  • Port sizePT1/8
  • CushionAdjustable, 27 mm
$92.09 $99.59Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ32 stroke, mounting and version on one page All SEJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ32X300-50S

The AirTAC SEJ32X300-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50mm adjustable stroke window. A rear stop screw lets you mechanically dial the retract stroke down from 300mm to 250mm, yielding an effective 250-300mm range without swapping hardware.

This 32mm bore unit includes a magnet (-S) for CMSE reed or DMSE electronic sensors and uses adjustable air cushions at both ends to manage kinetic energy. The rear rod provides an excellent mounting point for a cam or flag, and the extruded aluminum barrel ensures clean integration while remaining dimensionally interchangeable per ISO 15552.

Airtac SEJ Adjustable Cylinder SEJ32X300-50S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ32X300-50S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ32 mm
Nominal stroke300 mm
Adjustment window50 mm (250–300 mm)
ConfigurationDouble rod, double acting
Port sizePT1/8
Rod threadM10×1.25
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø32mm)

PressureForce (both directions)
0.5 MPa346 N
0.7 MPa484 N
Max (@1.0 MPa)70 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ32X300-50S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
32Bore size in mm.
×300Nominal stroke length in mm.
-50Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ32X300-50S Is Used

precision_manufacturing

Stop Position Truing

Dial in the exact 250-300mm end stop during machine commissioning to precisely strike a 345 N press fit without re-machining hard stops.

swap_horiz

Changeover Height Matching

Adjust the retract length on the fly to accommodate different workpiece heights on a conveyor, using the 50mm window to adapt the stroke instantly.

science

Trial Positioning Setup

Use the rear rod to mount a test cam and fine-tune the 345 N clamping position during R&D fixture development before locking the stop screw.

Is the Airtac SEJ Adjustable Cylinder SEJ32X300-50S the Right Cylinder?

This 50mm adjustment window is ideal for fine-tuning a precise end stop during machine commissioning or matching varying part heights. If your process needs less push, the smaller 32mm bore is the baseline, but stepping up to the 40mm bore yields 528 N both ways at 0.5 MPa. Conversely, if you need a fixed 300mm stroke without the adjustment mechanism, a standard SED cylinder is a simpler choice. For positioning safety, note that this cylinder does not hold position on air loss; the cushion and stop screw decelerate the load but do not lock it. When replacing an ISO 15552 unit, match the 32mm bore, 250-300mm range, PT1/8 port, and mounting style. Since the stroke is 300mm, external guides are recommended to prevent side-loading on the 12mm rod.

AirtacDistr lists every SEJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sej32-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (50mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 50mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ32X300-50S FAQ

A mechanical stop screw on the back rod lets you shorten the retract stroke by up to 50mm. The effective stroke range is 250mm to 300mm, which you set and lock in place during machine commissioning.

Because the rod exits both ends, force is equal in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ32X300-50S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ32X300-50S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.