verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ32X350-100S

The AirTAC SEJ Adjustable Cylinder SEJ32X350-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø32mm unit covers an effective stroke of 250–350mm without changing cylinders. Force is equal in both directions.

  • BoreØ32 mm
  • Nominal stroke350 mm
  • Adjust window100 mm
  • Effective stroke250–350 mm
  • Port sizePT1/8
  • CushionAdjustable, 27 mm
$97.67 $105.17Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ32 stroke, mounting and version on one page All SEJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ32X350-100S

The AirTAC SEJ32X350-100S is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, yielding identical annulus areas so output force is equal in both directions at 345 N each way at 0.5 MPa. The integrated magnet supports CMSE reed and DMSE electronic sensors.

This unit features a 100 mm adjustable stroke window, letting you mechanically dial the retract end from 250 mm up to the full 350 mm via a back-rod stop screw. You can fine-tune the exact end-position on the machine without swapping hardware. It runs at 30-800 mm/s with field-adjustable air cushions at both ends to decelerate the load near stroke end.

Airtac SEJ Adjustable Cylinder SEJ32X350-100S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ32X350-100S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ32 mm
Nominal stroke350 mm
Adjustment window100 mm (250–350 mm)
ConfigurationDouble rod, double acting
Port sizePT1/8
Rod threadM10×1.25
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø32mm)

PressureForce (both directions)
0.5 MPa346 N
0.7 MPa484 N
Max (@1.0 MPa)70 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ32X350-100S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
32Bore size in mm.
×350Nominal stroke length in mm.
-100Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ32X350-100S Is Used

settings

Press Tonnage Calibration

Dial in the exact 250-350mm contact position during press commissioning, utilizing the 345N both-way force to test precise switch actuation heights.

swap_horiz

Packaging Changeover

Adjust the retract stop to accommodate varying box sizes on a packaging line without changing hardware, relying on the equal push and pull force.

precision_manufacturing

Component Seating

Fine-tune the end-stop to gently seat delicate components, using the back-rod screw to dial out the final millimeters of travel accurately.

Is the Airtac SEJ Adjustable Cylinder SEJ32X350-100S the Right Cylinder?

Confirm the 100 mm adjustment window covers your required positioning range. If you need less fine-tune travel, a fixed-stroke SED saves cost. For sizing, the next bore down is not available in this series, but stepping up to a 40 mm bore yields 528 N both ways at 0.5 MPa, while this 32 mm bore provides 345 N both ways at 0.5 MPa.

At 350 mm stroke, the extended rod is prone to side-load bending; use external guides to support the tooling. Remember that the adjustable cushion and stop screw only set the mechanical end and decelerate the load; they do not hold position on air loss. For fail-safe holding, specify a BSED or an external rod lock. Ensure your ISO 15552 replacement matches the 32 mm bore, 350 mm stroke, PT1/8 port, and magnet option.

AirtacDistr lists every SEJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sej32-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (100mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 100mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ32X350-100S FAQ

A stop screw on the back rod mechanically shortens the retract stroke. For this model, you can dial the retract end over a 100 mm window, giving an effective stroke range of 250 to 350 mm. You lock the screw after setting the desired end-position.

Because it is a double-rod cylinder, force is equal both ways: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa. It is dimensionally interchangeable per ISO 15552 and uses a PT1/8 port.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ32X350-100S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ32X350-100S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.