Airtac SE32 Standard Cylinder SE32X350
The AirTAC Airtac SE32 Standard Cylinder SE32X350 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 350mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke350 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X350
The AirTAC SE32X350 is a double-acting, single-rod ISO 15552 profile cylinder engineered for a 32mm bore and 350mm stroke. It generates 402 N of push force and 345 N of pull force at 0.5 MPa, peaking at a maximum 82 kgf at 1.0 MPa. The extruded aluminum barrel lacks external tie rods, yielding a compact footprint that resists corrosion and mounts flush against machine frames.
Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard mechanical stops during 30-800 mm/s operation. This specific SKU is built without a magnet, meaning it does not support CMSE or DMSE position sensing out of the box.
Airtac SE32 Standard Cylinder SE32X350 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X350 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X350
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X350 Is Used
PCB Drill Spindle Loader
Handles the 350mm stroke extension to position micro-drill spindles over printed circuit boards, utilizing the 402 N push force for accurate linear placement.
Package Divert Arm
Actuates a routing arm on a packaging conveyor, relying on the adjustable cushion to bring the 350mm travel to a smooth halt without jarring lightweight cardboard cartons.
Lab Sample Indexer
Transfers test tube racks between analytical stations, where the compact tie-rod-free profile allows high-density mounting inside sensitive laboratory enclosures.
Is the Airtac SE32 Standard Cylinder SE32X350 the Right Cylinder?
Stepping down to a 25mm bore reduces the push capacity, while moving up to a 40mm bore increases the 0.5 MPa push force to 628 N for heavier payloads. Because this is a standard double-acting cylinder, it cannot hold a load if air pressure is lost or the valve centers; the piston will drift, requiring a BSE rod lock for secure positioning. With a 350mm stroke, the 12mm rod and rod bearing face increased bending moments under side loads, so an external guide is recommended to prevent premature wear. As a dimensionally interchangeable ISO 15552 component, it serves as a direct drop-in replacement sharing the PT1/8 port and standardized mounting interface.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X350 FAQ
The SE32X350 features a PT1/8 port and a 12mm rod. It delivers 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum push force of 82 kgf at 1.0 MPa.
Yes, the SE32X350 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint and body dimensions as other standard profile cylinders, allowing for a direct drop-in retrofit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X350
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.