verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ32X350-20S

The AirTAC SEJ Adjustable Cylinder SEJ32X350-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø32mm unit covers an effective stroke of 330–350mm without changing cylinders. Force is equal in both directions.

  • BoreØ32 mm
  • Nominal stroke350 mm
  • Adjust window20 mm
  • Effective stroke330–350 mm
  • Port sizePT1/8
  • CushionAdjustable, 27 mm
$97.67 $105.17Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ32 stroke, mounting and version on one page All SEJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ32X350-20S

The AirTAC SEJ32X350-20S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so the drive force is equal in both directions at 345N each way at 0.5 MPa. You can dial the retract end up to 20mm, giving an effective stroke range of 330-350mm for precise end-position tuning.

Because the rear rod extends through the back cap, the overall length is longer than a single-rod unit. The extruded aluminum barrel contains no external tie rods, and the integrated -S magnet enables direct mounting of CMSE reed or DMSE electronic sensors. Adjustable air cushions at both ends decelerate the 12mm rod near stroke ends, but do not lock the load.

Airtac SEJ Adjustable Cylinder SEJ32X350-20S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ32X350-20S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ32 mm
Nominal stroke350 mm
Adjustment window20 mm (330–350 mm)
ConfigurationDouble rod, double acting
Port sizePT1/8
Rod threadM10×1.25
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø32mm)

PressureForce (both directions)
0.5 MPa346 N
0.7 MPa484 N
Max (@1.0 MPa)70 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ32X350-20S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
32Bore size in mm.
×350Nominal stroke length in mm.
-20Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ32X350-20S Is Used

tune

Machine Commissioning

Dial in the exact 330-350mm end position during setup, using the 345N both-way force to fine-tune a delicate clamping mechanism without remachining stops.

swap_horiz

Part Height Changeover

Quickly adjust the retract stroke to accommodate varying workpiece heights on a packaging line, leveraging the equal extend and retract forces for consistent pressing.

science

Trial Positioning

Test multiple end-stop distances on a prototype assembly rig, relying on the -S magnet and DMSE sensors to confirm position feedback across the adjustment window.

Is the Airtac SEJ Adjustable Cylinder SEJ32X350-20S the Right Cylinder?

The 20mm adjustment window is ideal for commissioning fine-tune positioning or matching a variable stop on the machine. If you need less force, stepping down is not an option from 32mm, but if your application requires more thrust, the next bore up is 40mm delivering 528N each way at 0.5 MPa. If your stroke never varies after setup, a fixed-stroke SED saves length and weight.

When replacing an ISO 15552 cylinder, match the 32mm bore, 350mm nominal stroke, PT1/8 port, and mounting choice from the SEJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2). At 350mm stroke, the 12mm rod is slender; always guide external loads against side deflection. Note that the air cushion and stop screw only set the mechanical end and decelerate the load; they do not hold position on air loss. For fail-safe holding, use an external rod lock or BSED.

AirtacDistr lists every SEJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sej32-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (20mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 20mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ32X350-20S FAQ

The 20mm adjustment window lets you mechanically dial the retract stroke via a back-rod stop screw. This shortens the effective stroke from 350mm down to 330mm, allowing precise on-machine end-position tuning. You lock the screw after setting the desired distance.

Because the rod exits both ends, the annulus area is identical in both directions. The force is equal both ways: 345N at 0.5 MPa, 483N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ32X350-20S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ32X350-20S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.