verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ32X50-20SH

The AirTAC SEJ Adjustable Cylinder SEJ32X50-20SH is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø32mm unit covers an effective stroke of 30–50mm without changing cylinders. Force is equal in both directions.

  • BoreØ32 mm
  • Nominal stroke50 mm
  • Adjust window20 mm
  • Effective stroke30–50 mm
  • Port sizePT1/8
  • CushionAdjustable, 27 mm
$72.08 $79.58Save 9% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ32 stroke, mounting and version on one page All SEJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ32X50-20SH

The AirTAC SEJ32X50-20SH is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, making the annulus area identical and delivering equal force both ways at 345 N at 0.5 MPa. A stop screw on the back rod lets you dial the retract end over a 20 mm window, setting an effective stroke range of 30 to 50 mm without changing hardware.

Built for harsh environments, this unit uses an FKM seal to operate up to 150 C. The extruded aluminum barrel has no external tie rods, and adjustable air cushions at both ends decelerate the 12 mm rod near stroke ends. The integrated magnet supports CMSE reed and DMSE electronic sensors.

Airtac SEJ Adjustable Cylinder SEJ32X50-20SH Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ32X50-20SH
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ32 mm
Nominal stroke50 mm
Adjustment window20 mm (30–50 mm)
ConfigurationDouble rod, double acting
Port sizePT1/8
Rod threadM10×1.25
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø32mm)

PressureForce (both directions)
0.5 MPa346 N
0.7 MPa484 N
Max (@1.0 MPa)70 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ32X50-20SH

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
32Bore size in mm.
×50Nominal stroke length in mm.
-20Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ32X50-20SH Is Used

tune

Packaging Stop Calibration

Dial the 20 mm retract window to perfectly position a 345 N stop for varying carton sizes on a packaging line without swapping cylinders.

precision_manufacturing

Hot End Pick-and-Place

Leverage the 150 C FKM seal and equal both-way force to precisely place parts near thermal printers, adjusting the 30 to 50 mm stroke on the machine.

science

Test Fixture Positioning

Set exact 30 to 50 mm endpoints for applying 483 N at 0.7 MPa in component stress rigs, locking the back-rod stop screw once aligned.

Is the Airtac SEJ Adjustable Cylinder SEJ32X50-20SH the Right Cylinder?

This 32 mm bore fits applications needing 345 N both ways at 0.5 MPa; if you need less force, no smaller SEJ bore exists, but stepping up to a 40 mm bore yields 528 N. If your end position never varies, a fixed-stroke SED avoids the adjustment screw. The 20 mm window is ideal for fine-tuning a 30 to 50 mm stroke during commissioning. Remember, a plain SEJ does not hold position on air loss; the cushion and stop screw only set the mechanical end. For fail-safe holding, use an external rod lock. When replacing an ISO 15552 cylinder, match the 50 mm stroke, 20 mm window, PT1/8 port, and your mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.

AirtacDistr lists every SEJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sej32-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (20mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 20mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ32X50-20SH FAQ

The retract end has a 20 mm adjustment window via a back-rod stop screw. You can dial the effective stroke from 30 mm up to the full 50 mm, then lock it for precise end-positioning.

Because the rod exits both ends, force is equal in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ32X50-20SH

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ32X50-20SH and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.