
The AirTAC SEJ Adjustable Cylinder SEJ50X1000-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø50mm unit covers an effective stroke of 900–1000mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X1000-100S is a double-acting, double-rod ISO 15552 profile cylinder with a 1000 mm nominal stroke and a 100 mm adjustable stroke window, yielding an effective travel range of 900-1000 mm.
A stop screw on the back rod lets you mechanically dial in the retract end position without reprogramming the machine. The -S magnet enables position detection with CMSE reed or DMSE electronic sensors, while field-adjustable air cushions at both ends manage deceleration over the long travel.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X1000-100S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 1000 mm |
| Adjustment window | 100 mm (900–1000 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×1000 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 100 mm window to synchronize the 1000 mm feed stroke precisely with varying material widths, using the equal 825 N both-way force to push and retract the gripper.
Fine-tune the 900-1000 mm effective stroke to find the exact engagement point for large parts, locking the back-rod screw once the trial position is set.
Verify the 100 mm adjustment window covers your end-position tolerance. If you need less force, the 40 mm bore provides 528 N both ways at 0.5 MPa; stepping up to the 63 mm bore yields 1402 N. If the exact stroke never varies after commissioning, a fixed-stroke SED saves cost. The cushion is for deceleration only and does not hold position on air loss; use an external rod lock for fail-safe holding.
At 1000 mm of travel, side loading is a primary risk. Guide the load externally to prevent rod bending, and ensure the PT1/4 port and M16x1.5 rod thread match your existing ISO 15552 footprint.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke over a 100 mm window. For this 1000 mm model, you can dial the effective stroke anywhere from 900 to 1000 mm, then lock the screw in place.
Because it is a double-rod cylinder, force is equal in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.