verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ50X1000-30S

The AirTAC SEJ Adjustable Cylinder SEJ50X1000-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø50mm unit covers an effective stroke of 970–1000mm without changing cylinders. Force is equal in both directions.

  • BoreØ50 mm
  • Nominal stroke1000 mm
  • Adjust window30 mm
  • Effective stroke970–1000 mm
  • Port sizePT1/4
  • CushionAdjustable, 30 mm
$257.52 $265.02Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ50 stroke, mounting and version on one page All SEJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ50X1000-30S

The AirTAC SEJ50X1000-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30mm adjustable stroke window. You can dial the retract end from 970mm to the full 1000mm, allowing precise end-position tuning during commissioning.

This extruded aluminum profile cylinder includes a built-in magnet for CMSE reed or DMSE electronic sensors. Field-adjustable air cushions at both ends decelerate the load near stroke end. The rear rod protrusion also provides a convenient mounting point for a cam or flag, while the PT1/4 ports and M16x1.5 rod thread match standard ISO 15552 dimensional envelopes.

Airtac SEJ Adjustable Cylinder SEJ50X1000-30S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ50X1000-30S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ50 mm
Nominal stroke1000 mm
Adjustment window30 mm (970–1000 mm)
ConfigurationDouble rod, double acting
Port sizePT1/4
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressureForce (both directions)
0.5 MPa825 N
0.7 MPa1155 N
Max (@1.0 MPa)168 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ50X1000-30S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
50Bore size in mm.
×1000Nominal stroke length in mm.
-30Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ50X1000-30S Is Used

precision_manufacturing

Press Stroke Calibration

Dial in the exact 970-1000mm end stop during press commissioning, utilizing the 825N both-way force for consistent forming pressure.

swap_horiz

Multi-Height Pallet Changeover

Adjust the retract position up to 30mm to accommodate different pallet heights without changing cylinder hardware.

conveyor_belt

Variable-Stop Diverter

Fine-tune the diverting arm position on a conveyor line, using the double-rod equal force for smooth retraction.

Is the Airtac SEJ Adjustable Cylinder SEJ50X1000-30S the Right Cylinder?

The 30mm adjustment window lets you fine-tune the retract stop without swapping hardware, ideal for dialing in a precise 970-1000mm end point. If your force needs are lower, the 40mm bore delivers 528N each way at 0.5 MPa; if you need more push, step up to the 63mm bore for 1402N both ways. If your end position never changes, a fixed-stroke SED cylinder is sufficient. For a direct ISO 15552 replacement, match the 50mm bore, 1000mm stroke, PT1/4 ports, and your mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2. Note that at 1000mm stroke, you should use external guides to prevent rod side-loading. The air cushion is not a fail-safe lock; for position holding on air loss, use a BSED or external rod lock.

AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (30mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 30mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ50X1000-30S FAQ

The 30mm adjustment window allows you to mechanically shorten the retract stroke from 1000mm down to 970mm via a stop screw on the back rod, which you lock in place after setting your exact end position.

Because the double-rod design yields equal force both ways, it provides 825N at 0.5 MPa, 1154N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ50X1000-30S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ50X1000-30S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.