verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ50X150-10

The AirTAC SEJ Adjustable Cylinder SEJ50X150-10 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø50mm unit covers an effective stroke of 140–150mm without changing cylinders. Force is equal in both directions.

  • BoreØ50 mm
  • Nominal stroke150 mm
  • Adjust window10 mm
  • Effective stroke140–150 mm
  • Port sizePT1/4
  • CushionAdjustable, 30 mm
$101.86 $109.36Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ50 stroke, mounting and version on one page All SEJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ50X150-10

The AirTAC SEJ50X150-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 10 mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so output force is equal in both directions at 825 N (0.5 MPa). You can dial the retract end from 140 mm up to the 150 mm nominal stroke to perfectly match a mechanical stop.

This unit uses a 20 mm rod with an M16x1.5 thread and PT1/4 ports. The extruded aluminum barrel omits external tie rods for a clean profile, and field-adjustable air cushions at both ends manage deceleration. This SKU lacks a magnet, so it does not support CMSE or DMSE position sensors.

Airtac SEJ Adjustable Cylinder SEJ50X150-10 Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ50X150-10
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ50 mm
Nominal stroke150 mm
Adjustment window10 mm (140–150 mm)
ConfigurationDouble rod, double acting
Port sizePT1/4
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressureForce (both directions)
0.5 MPa825 N
0.7 MPa1155 N
Max (@1.0 MPa)168 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ50X150-10

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
50Bore size in mm.
×150Nominal stroke length in mm.
-10Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ50X150-10 Is Used

precision_manufacturing

Press Stroke Calibration

Dial in the exact 140-150 mm end position during light assembly press commissioning, using the 825 N both-way force to seat parts without over-traveling.

swap_horiz

Part Height Changeover

Adjust the retract stop on the fly when a conveyor line switches to a different product height, letting the double-rod maintain equal push and pull thrust.

tune

Gripper Trial Positioning

Fine-tune the gripping depth by 10 mm on a packaging machine to test pick points, relying on the 30 mm adjustable cushion to soften the end-of-stroke impact.

Is the Airtac SEJ Adjustable Cylinder SEJ50X150-10 the Right Cylinder?

Verify the 10 mm adjustment window covers your positioning range. If you need less force, the 40 mm bore provides 528 N at 0.5 MPa; stepping up to the 63 mm bore yields 1402 N. If your end position never changes, a fixed-stroke SED saves complexity. Remember, the adjustable cushion and stop screw decelerate the load but do not hold position on air loss—use an external rod lock for fail-safe clamping. Because the stroke is 150 mm, ensure external guides manage side loads to protect the 20 mm rod seals.

AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (10mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 10mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ50X150-10 FAQ

A stop screw on the back rod lets you mechanically shorten the retract stroke by up to 10 mm. This gives an effective stroke range of 140-150 mm, which you lock in place after setting the exact machine end position.

Because it is a double-rod cylinder, force is equal in both directions. It provides 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ50X150-10

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ50X150-10 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.