
The AirTAC SEJ Adjustable Cylinder SEJ50X150-100 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø50mm unit covers an effective stroke of 50–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X150-100 is a double-acting, double-rod ISO 15552 profile cylinder with a 100 mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so output is exactly 825 N each way at 0.5 MPa. The retract end stop screw lets you dial the effective stroke down from 150 mm to 50 mm without changing hardware.
This unit uses a PT1/4 port and a Ø20 mm rod with an M16x1.5 thread. Field-adjustable air cushions at both ends absorb kinetic energy near stroke end. This SKU lacks a piston magnet, so it will not trigger CMSE or DMSE sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X150-100 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 100 mm (50–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 100 mm window to match varying part heights on a machining fixture. The equal 825 N both-way force securely clamps and releases different workpieces.
Act as an adjustable flight stop on a packaging conveyor. Fine-tune the retract stroke from 50 to 150 mm on the machine to sort different carton sizes without swapping cylinders.
Find the exact engagement point for a testing probe. The back-rod stop screw lets you sweep the effective stroke during R&D, then lock it down for repeated cycles.
This 50 mm bore gives 825 N both ways at 0.5 MPa. If you need less force, the 40 mm bore provides 528 N; stepping up to the 63 mm bore yields 1402 N. Choose the SEJ50X150-100 when you need to commission a precise end-position across a 50-150 mm range. If your machine never requires stroke adjustment, a fixed-stroke SED saves length and cost.
The air cushion and mechanical stop screw decelerate the load but do not hold position on air loss; add an external rod lock for fail-safe holding. At 150 mm stroke, side loads are minimal, but ensure your external guides carry the payload to prevent rod binding.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the rear rod mechanically limits the retract stroke. You can adjust the effective stroke anywhere from 50 mm up to the full 150 mm. Once set, you lock the screw to maintain that exact end-position.
Because it is a double-rod cylinder, force is identical in both directions. It provides 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.