
The AirTAC SEJ Adjustable Cylinder SEJ50X150-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø50mm unit covers an effective stroke of 50–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X150-100S is a double-acting, double-rod ISO 15552 profile cylinder with a 100 mm mechanical stroke-adjustment window. You can dial the retract end from 50 mm up to the 150 mm nominal stroke, letting one unit cover a wide positioning range without swapping hardware.
A stop screw on the back rod sets the precise end position and must be locked after commissioning. The extruded aluminum barrel has no external tie rods, and the -S magnet enables position detection with CMSE reed or DMSE electronic sensors. Adjustable air cushions at both ends decelerate the load smoothly near stroke end.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X150-100S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 100 mm (50–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 100 mm window to raise or lower a 825 N clamping head, matching varying part heights on a machining fixture without fabricating new spacers.
Set a precise mechanical stop for pallets on a conveyor, adjusting the 50 to 150 mm retract distance on the fly to accommodate different box sizes.
Verify the 100 mm adjustment window covers your positioning range; here, effective travel is 50 to 150 mm. If you need less force, the 40 mm bore provides 528 N both ways at 0.5 MPa; if your load is heavier, step up to the 63 mm bore for 1402 N. If you never need to change the stroke after setup, a fixed-stroke SED saves cost and length. Note that the plain air cushion and stop screw decelerate the load but do not hold position on air loss—use a BSED or external rod lock for fail-safe holding. When matching an ISO 15552 replacement, confirm the PT1/4 port, 150 mm stroke, and 100 mm window.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the rear rod lets you mechanically shorten the retract stroke. For this model, the adjustment window is 100 mm, making the effective stroke range 50 to 150 mm. You set the exact end position during commissioning and lock the screw in place.
Because it is a double-rod cylinder, force is equal in both directions. It generates 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.