
The AirTAC SEJ Adjustable Cylinder SEJ50X150-10SH is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø50mm unit covers an effective stroke of 140–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X150-10SH is a double-acting, double-rod ISO 15552 profile cylinder featuring a 10mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so output force is perfectly equal in both directions at 825 N each way at 0.5 MPa. You can dial the retract end from 140mm up to 150mm to hit an exact machine stop.
This unit carries the -S magnet for CMSE reed or DMSE electronic sensors and uses a high-temperature FKM seal, extending the operating range up to 150 C. The extruded aluminum barrel has no external tie rods, and adjustable air cushions at both ends decelerate the Ø20mm rod near stroke ends. Mount using Basic, FA, LB, TC, FTC, TCM1, or TCM2 hardware.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X150-10SH |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 10 mm (140–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 140-150mm retract stop to fold varying carton flap heights precisely, leveraging the 825 N both-way force to consistently crease heavy corrugated board.
Fine-tune the exact 10mm end position during machine commissioning to set component insertion depth, matching the precise contact point without swapping hardware.
Adjust the rear rod stop screw to quickly shift the end position when switching a conveyor line between different product families, locking the 20mm rod rigidly after setting.
Confirm the 10mm adjustment window covers your positioning range before ordering. If you need less force, the 40mm bore delivers 528 N both ways at 0.5 MPa; if you need more, step up to the 63mm bore for 1402 N. If the exact end position is already fixed and requires no tuning, a standard SED double-rod cylinder provides sufficient function. For replacing an ISO 15552 unit, match the 50mm bore, 150mm stroke, PT1/4 port, and your preferred mounting. Remember, the adjustable cushion and stop screw decelerate the load but do not hold position on air loss; for fail-safe holding, specify an external rod lock.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the back rod lets you mechanically shorten the retract stroke within a 10mm window, giving an effective stroke range of 140 to 150mm. You dial the exact end position during commissioning and lock it in place.
Because it is a double-rod design, force is equal both ways: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa. It operates at speeds of 30-800 mm/s.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.