
The AirTAC SEJ Adjustable Cylinder SEJ50X150-20 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø50mm unit covers an effective stroke of 130–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X150-20 is a double-acting, double-rod ISO 15552 profile cylinder with a 20 mm adjustable retract window. You can dial the effective stroke from 130 mm up to 150 mm. A stop screw on the back rod lets you set the exact end position during machine commissioning, and a locknut secures it after adjustment.
This unit uses a PT1/4 port, a 20 mm rod with an M16x1.5 end thread, and field-adjustable air cushions at both ends to manage deceleration. This SKU has no internal magnet, so it will not host CMSE or DMSE position sensors without modification. The extruded aluminum barrel contains no external tie rods, and the mounting set covers Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X150-20 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 20 mm (130–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Delivers 825 N of equal both-way force at 0.5 MPa, letting you fine-tune the 130-150 mm stroke to hit the exact closure height on a light assembly press.
The 20 mm retract window lets an operator quickly reposition a stop for a new part height on a conveyor transfer line without machining new spacers.
Dial the back-rod stop screw during machine commissioning to test clamping pressure locations, locking the nut once the perfect 130-150 mm position is found.
The 20 mm adjustment window is perfect for dialing in a precise 130 to 150 mm end stop on the machine without swapping hardware. If you need less push, the 40 mm bore provides 528 N both ways at 0.5 MPa; if you need more, stepping up to the 63 mm bore yields 1402 N at 0.5 MPa. If your end position never varies, a fixed-stroke SED cylinder is a simpler choice. To match an ISO 15552 replacement, verify the 50 mm bore, 150 mm stroke, 20 mm window, PT1/4 port, and mounting style. Note that the air cushion and stop screw decelerate the load but do not hold position on air loss; for fail-safe holding, use an external rod lock or BSED cylinder.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the rear rod lets you mechanically shorten the retract stroke by up to 20 mm. This gives an effective stroke range of 130 to 150 mm, which you set mechanically and lock in place.
Because the rod exits both ends, force is equal in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.