
The AirTAC SEJ Adjustable Cylinder SEJ50X150-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø50mm unit covers an effective stroke of 120–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X150-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30mm adjustable stroke window. A rod exits both ends, meaning the annular area is identical in both directions. This yields an equal output force of 825 N each way at 0.5 MPa, preventing speed and force mismatch between extend and retract. The -S suffix equips the piston with a magnet for CMSE reed or DMSE electronic sensors.
You dial the retract end position by turning a stop screw on the back rod, shortening the effective stroke from 150mm down to 120mm. After setting your exact end position, lock the screw to secure the mechanical stop. The extruded aluminum barrel omits external tie rods for a clean ISO 15552 envelope, and field-adjustable air cushions at both ends decelerate the load near stroke ends.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X150-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 30 mm (120–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 120-150mm retract stop to precisely fold varying carton flap heights.
Quickly reposition the reject arm for different product lengths without changing hardware. The 30mm back-rod adjustment window lets operators fine-tune the ejection endpoint on the fly.
Trial-fit bearings into housings by adjusting the stroke end to dial in exact insertion depth.
Confirm the 30mm adjustment window covers your positioning range, allowing you to fine-tune the retract stop from 120 to 150mm during commissioning. If your application needs less force, the adjacent 40mm bore delivers 528 N both ways at 0.5 MPa; if you need more power, step up to the 63mm bore for 1402 N both ways. If you never need to alter the end position after setup, a fixed-stroke SED cylinder is a simpler choice. Remember that a plain SEJ does not hold position on air loss; the adjustable cushion and stop screw decelerate and set ends but do not lock. For fail-safe holding, pair this cylinder with an external rod lock.
When replacing an ISO 15552 cylinder, match the 50mm bore, 150mm nominal stroke, PT1/4 port, and your mounting choice from the SEJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the 150mm stroke is under 300mm, side loading is less severe, but you should still ensure the front and rear rods are aligned to avoid binding the double-rod guide.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the rear rod lets you mechanically shorten the retract stroke. The 30mm window means the effective stroke adjusts from 120mm up to 150mm. You set the exact end position and lock the screw in place.
Because the rod exits both ends, the force is identical in both directions: 825 N at 0.5 MPa and 1154 N at 0.7 MPa. The maximum force is 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.